Jacks On The Back Of Your Tv - GE 31GT740 User Manual

Connections & Setup
Jacks on the Back of Your TV
If yon are connecting many components,
please
cousult the manual that calne with each
component for connection instructions. The picture of your TV's back panel describes the
jacks on the back of yonr TV and what types of components that you can connect tn these jacks.
When connecting, make sure you connect Output jacks to Input jacks, Vide() to Video, Right
Audio to Right Audio, etc.
Audio and Video Input Jacks:
AUDIO R and L/MONO and VIDEO
Connect any of the following components:
• DVD Player • Satellite Receiver
• Laserdisc Player ° VCR
• Internet Access Device
To watch the content from the compormnt that's
connected to the VIDEO Input Jack, press the
WHO • INPUT button on the remote (the TV
switches to the correct channel).
(backpanel)
G-LINK
@
AUDIO
VIDEO R L/ MOHD
@ 01'"
R L
G-LINK Jack
Connect the end of the
G-LINK cable (provided) to dais
jack. The G-LINK cable enables
the TV's Guide Plus+ system to
interact with the cable box
and/or the VCR. A picture of
the G-LINK cable is on page 7.
<.
/
S-VIDEO Jack
Connecting an
S-Video cable is
optional. S-Video
provides better
picture quality
than a regular
video cable.
Audio Output Jacks:
R and L OUT
Connect audio cables to
these jacks and to an
amplifier or audio receiver
for improved sound quality.
_ CABLE/
ANTENNA
S-VIDEO 1
F
CABLE/ANTENNA
Jack
Connect the coaxial cable
from the VCR's Output jack
to this jack. If you're not
connecting a VCR, connect a
coaxial cable that carries the
signal from the antenna,
cable, or cable box to the
GABLE/ANTENNA jack.
12 Chapter 1