Table of Contents
Advertisement
II
÷
II
Connections
Setup
VCR
TV(back panel)
Note: The 1V model shown here is
24F530T.The 24V510Tdoes not include
the Y, Pb,Pr (Component Video jacks},
Audio Output jacks, or Subwoofer jack.
DVD
÷
TV + DVD + VCR
1. Connect your DVDPlayer to your IX/.
A, Connect the audio (white and red] cables to the VIDEO1 R and L/MONOAUDIOjacks on the back
of the W and to the Audio Output jacks on the DVD player (sometimes labeled L and R).
÷
B. If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and to the S-VIDEO jack on the back of the W. If your DVD player doesn't have an
S-Video jack, go to 1D.
-OR-
C, Model 24F530T only: if your DVD player has a component
video jacks (Y,Pb,Pr), connect video
grade cables to the Component
Video jacks on the DVD player and to the Y, Pb, Pr jacks on the
back of the TV. If your DVD player doesn't have component
video jacks, go to 1D.
-OR-
D. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO jack
on the back of the _V.
2. Connect your lV to your VCR
Connect a coaxial cable to the ANTENNA IN jack on your TV and to the RF Output jack on your VCR
(sometimes labeled OUT TO _V).
3.
Make sure cable or antenna
is connected
to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR
(sometimes labeled In From Antenna].
4
Chapter 1
Advertisement
Table of Contents
