Table of Contents
Advertisement
Trouble Checks
Trouble
7v
No picture or sound
Checks
and Adjustments
Check your connections.
Make sure TV's power
cord is plugged
into a wall socket.
Make sure TV is turned
on.
Make sure TV is tuned to correct channel.
If TV is tuned to channel 00,
turn on component
connected
to TV's AUDIO and VIIgEO jacks.
Make sure TV is tuned to the output
channel (usually 02, 03, or 04) if
using a cable box.
No sound
Make sure the TV's internal speakers
are turned
on.
No stereo sound
Connect the three audio and video cables from the component's
outputs
to the TV's inputs, then select channel 00 on TV to hear stereo from a
stereo component.
Make sure the TV's stereo feature is turned
on.
Sound comes from only
one speaker
Make sure the monaural (not stereo) component's
AUDIO OUT is
connected
to the TV's AUDIO IN jack labeled
L/MONO.
Check the speaker
wire connections
if you connected
an amplifier.
Color streaks appear in the
picture
Make sure all cables are firmly seated in their jacks.
Place external speakers
at least 8 inches away from the TV.
VCR
No picture
For connections
1B, 1C, 4C, 5C:
1. Make sure the VCR is turned
on and tuned to an active channel.
2. Select channel 00 on the TV when VCR is connected
to the TV using the
the AUDIO and VIDEO iN jacks.
c,gntinued on ilhe next page
23
Advertisement
Table of Contents
