Table of Contents
Advertisement
Back Panel
R-AUDIO-L
VIDEO
IN FROM
out
MONO
VHF/UHF
I
OUTTO"rv
,.,
3 CH. 4 Switch
Selects the channel to which you will tune theTV to see theVCR picture if
you connect theVCR using the IN FROM ANT. and RF jacks.
AUDIO
(R and L) and VIDEO
IN Jacks
Receives signals from another component, like a
VCR or camcorder, when it is connected to these jacks. Use INPUT on the remote to select.
AUDIO
(R and L) and VIDEO
OUT Jacks
Sends signals from VCR to another component,
like aTV or VCR, when it is connected to these jacks.
IN FROM ANT. Jack
Receives a signal from an antenna or cable system when attached.
OUT TOTV
Jack
Passes signal toTV using the cable supplied.
Indicator
Panel
e) HI-R
(_)STEREO
m
SAP
POWER
I_
VCR
(_
TIMER
•
RECORD
HI-FI Indicator
Lights during playback whenTape Playback: HI-FI/LINEAR/MIX
feature is set
to HI-FI.
POWER Indicator
Lights when the VCR is turned on.
RECORD Indicator
Lights when the VCR is recording.
STEREO
Lights when theVCR is receiving a stereo signal, and you've selectd Stereo in the
Audio Menu.
SAP
Lights when the VCR is receiving a SAP signal, and you've selected SAP in the Audio
menu.
TIMER
Indicator
Lights during an express or timer recording, or when theVCR is set for a
timer recording and theVCR is turned off. Flashes when a timer recording is set, and there
is no cassette in the VCR.
VCR Indicator
(Applies Only if the VCR Viewing Channel is 3
or 4). Press theTV-VCR button to turn on or off.
•
VCR indicator on: Picture from VCR.
•
VCR indicator off: Picture fromTV channel.
43
Advertisement
Table of Contents
