Tracking; Audio Set-Up Features - GE VG4241 User Manual

Tracking
Your VCR has automatic tracking which removes the streaks or
snow from the picture. Automatic tracking is activated when
you insert a tape or turn on theVCR. Occasionally you may
need to manually adjust tracking, especially if the tape was
recorded on a differentVCR. Just use theTRACKING buttons to
remove the streaks or snow. You can also use tracking when you
PAUSE a tape to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of theVCR at the same time, or
eject the tape and re-insert it.
Tracking has no effect during recording--only playback.
Audio Set-up Features
The audio set-up features enhance your tape playback and
recordings.The features in this section are accessed through the
AUDIO menu and are shown in the displays below.
1. I_ress MENU to bring up theVCR MAIN MENU.
VCR RAIN MENU
1 Timer Recordings
2 Time
3 Channels
4 Preferences
5 Audio
6 Language
0 Exit
.
Press 5 to display the AUDIO menu.
AUOIO
I Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
Now you are ready to select an item from the menu to set up.
32