Page 1
For qualified service personne_ only Version 1,,0 for 2012 Mode_, 50LB45RQ Made for Today. www.rca.com...
Page 2
Revision No. Revision Date Page Description May, 2012 Initial Release Version 1.0...
Page 3
1.1 Basic Specifications 50 inches Diagonal Display Size Television System American TV standard ATSC/NTSC system VHF:2-13 UHF:14-69 CAW:1-135 Channel Coverage Storage Temperature is -20°C-+60°C (-4°F-+140°F) Temperature Operating Temperature is 0°C-+50°C (+32°F-+122°F) Storage Humidity: Less than 85% RH (No condensation) Humidity Operating Humidity: Less than 80% RH (No condensation) AC 100-120V,...
Page 4
1,2 Product Function Side Keypad Buttons If you cannot locate your remote, you can use the side keypad buttons on your TV to operate many TV features. INPUT: Displays the Source Select List. MENU: Displays the TV Main Menu. OH ,, : Scans up through the channel list. In the TV menu system, it acts like the up arrow on the remote control and can be used to select menu options.
Page 5
1.3 Connection Interface HEAD PHONE: Connect a 3.5mm headphone for personal audio. Digital Audio-out: Connect a coaxial cable for digital audio output. HDMI1, 2, 3, 4: (High-Definition Multimedia Interface) It provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. AUDIO OUTPUT L/R: Connect double-channel coaxial cables for analog audio output.
Page 6
2.1 General Information GENERAL DESCRIPTION OVERVIEW V500HJI-L01 is a 50 TFT Liquid Crystal Display module with 12-CCFL Backlight unit and 2ch-LVDS interface. This module supports 1920 x 1080 Full HDTV format and can display 16.7M colors (8-bit). The inverter module for backlight isnt built-in.
Page 7
3.1 Inner Structure Inside cabinet (front) Version 1.0...
Page 8
Item List RE32185B050 IR board 22F, 38.5X12.3X1.6mm RE0340E011 Key board 22F, 107X12X1.6mm RE01 TC81ELNA0 Main board T.RSC8.1E (It is for version 2012) RE46DZ2009 Power board IPB539 200W RE261530458105 Speakers 8Ohm, 10W Note: (1,2) 22F and dimensions refer to the PCB board. 3.2 Main board connection CN17 CN25...
Page 9
Jack List Jack N01 Specification Description connection Note CN25 10 Pin 2.54mm Main power To Power board C N 17 2x20 Pin 2,0ram LVDS interface To LCD panel 14 Pin 2.0mm IR and keyboard jack To IR board and keyboard 6Pin2.0mm Inverter Jack To LCD panel inverter board...
Page 11
Note: Before opening the cabinet and working on the repairs, please read the troubleshooting and Q&A attached in the user's manual, which has covered most of the problems caused by unproper using or settings to the TV set. If that does not work, please carry out the easy troubleshooting before checking or replacing the main parts of the television.
Page 12
4.2 Troubleshooting for Displaying Note: If the troubleshooting given below can not help you, change the LCD panel for a try. But we strongly suggest you regard changing the panel as the last step of fixing the display problem. No display (including white screen, black screen, etc.) •...
Page 13
4.3 Troubleshooting for Audio Note: Comparing with the display problem, the audio malfunctions are easier to work out. Constantly, if you have excluded the possibility of bad speakers and bad connection of audio output, the problem generally comes from the audio processing parts of mainboard.
Page 14
Keys are sunken • Check the screws that fasten the keyboard to the cabinet. They may be lost or getting loose. • The key set may be bad, change them. There is a reacting delay when operating the keys o That is usually caused by bad keyboard, change it for a try. Functions of keys are out of order o Check the keyboard to see whether there is a short circuit between each soldering joint.
Page 15
Note: The exception handles are prepared for qualified personal only. 5.1 Display Exceptions 5,1.1 Black screen and no display Note: If the troubleshooting guide can not help you with the obviation of faults, please change the non-conforming materials to rework. Check the external power supply...
Page 16
5ol DispJay Exceptions 5.1.2 White screen White screen supply for panel works check the voltage on the PIN no.1-3 of o m m u n ica tio n between is voltage on S-pole of Q7(5V or 3.3V) i_normal whether Ithe jumper of CN2?, voltage on C-pole...
Page 17
5.1 Display Exceptions 5.1.3 Dazzling screen Reset the driving voltage Check if the LVDS Change LVDS cable cable is bad e if the panel is bad? Change LCD panel Check if the out network and the Change main board normal Check the power supply and clock circuit of U8...
Page 18
5,2 Audio Exceptions 5,2.1 No sound (completely) No sound Check if there is audio input Check external equipment <_, volume are Set the mute and volume Does CNA1 Check the TV speakers _ve output signa if the Audio power supply circuit p1,2,3,34,35,36 is bad, change main board s ok?
Page 19
5.2 Audio Exceptions 5.2.2 No sound (TV) Refer to NO SOUND Check if the circuit Change U8, if that doesnt betweenUT3andU8 work, change main board Change UT3 Version 1.0...
Page 20
5,2 Audio Exceptions 5.2.3 No sound (HDMI) Unsupported signal, change Is the signal _]]_1 source HDMI OK? input signal of HDMI device Check if the PC/AV Refer to NO SOUND sound is normal Change U7or <,_ Is the EDID(1) YeS>ill or main board Upgraded firmware Note (I): EDtD means Extended Display Identification Data...
Page 21
5,3 Function Exceptions 5,3.1 TV function rv can't scan channel/no picture} Check-Pv' RF signal (antenna, cable) by UT2, LT17 <_Check !!p14an_-- I2C network is bad, YesA N___ UT3 s bad, change UT3 Change main board Change Note: (1) iF: Intermediate Frequency (2) AGC: Automatic Gain Control...
Page 22
5.3 Function Exceptions 5.3.2 HDMI no picture No signal or image abnormal under HDMI the in Replace the signal source signal source under HDMI is norma Overhaul the relevant if the input circuits between HDMI on the pin under relevant input channel and U7 HDMI channel...
Page 23
5.3 Function Exceptions 5.3.3 YPbPr no signal YPbPr no signal Check the YPbPr AV device | or YPbPr cables U8 surrounding circuits are bad, change main board U8 front circuits are bad, change main board work, change main board Version 1.0...
Page 24
REC8(it is for version 2012) series main board has a USB SERVICE port, which is reserved for service use only. Please upgrade the firmware according to the instruction below. 6.1 Direct upgrading (do no need normal display) STEP1 Get an empty USB disk with size not larger than 2GB, copy firmware file (CompBase.bin, or AIICompBase.bin) to the root directry of disk.
Page 25
6.3 Upgrade Color Balance Table and Backlight configuration file 1 .When you finish to upgrade the basic software, it will display the software date in the factory main menu. the software date 2. Download the color balance table file (CompQuality.bin) and backlight configuration files (ComScaling.bin)
Page 26
Adjust Color Balance Table (White Balance) FACTORY MAIN MENU has a WB function, you can adjust the white balance in this menu by adjusting R/G/B value. Press the remote control buttons "MENU"_"1147" to enter the factory menu (see below). Choose "WB"(White Balance) and press OKto...
Page 27
¢ Main Board (SCH) CN25 RE01TC81ELNA0 (2012) PVLU IOPlN 2 5&I>H G 100ttF-25V-+20%-6*7-105 R215 _%_STB 0 htF- 0402-Y%_-+ 80%-20% -16_, _R2'46 0 htF-0402-Y%_-+ 80%-2_ 1, -16_, 4K7dun-0402-_S°>l,'l_V VC?Panel 10Kohm-@D2-_5%- M 6W AO34(_ 10Kohm-@D2-_5%- H 6W 100uF-25V-_20%-6*7 PMBT390_ 0 htF-IMO2-Y5_,c+ 80%- 20%- 16_, POWER ON 510oban-_02-+-_%- 1/I6W PMI3T39BI...