Table of Contents
Advertisement
PROGRAMMING
THE REMOTE
TO
CONTROL
AN AUXILIARY
COMPONENT
Your remote
can also control
the brands
of the equipment
listed,
such as a radio,
CD player,
tape
player, or
phonograph.
It is already
programmed
to control
some
ProScan and RCA amplifiers
and audio/video
receivers.
1.
Turn on the component
to be programmed.
2.
Look up your
component's
code number
on the code
list.
3.
Press and hold the AUX button.
.
5.
Enter the 4-digit
code from
the code list on the next
page.
Release the AUX button
and press ONeOFF or CHAN up
or down
to see if the auxiliary
component
responds
to
the remote
commands.
OPERATING
THE
AUXILIARY
COMPONENT
After you have programmed
your
remote,
see which
buttons
will operate
your
component.
1.
Point
the remote
at the component
and press AUX. If it
does not turn
on, press AUX and then
ON,OFF.
2.
You may want
to experiment
to see which
buttons
will
operate
your component.
Try pressing
buttons,
such as
play, REVERSE, and FORWARD.
42
ON,OFF
AUX
REVERSE PLAY
FORWARD
You'll use these buttons when you
program the remote to control an
i auxilia_
component.
Auxiliary
Component
Codes
Proscan/RCA/Dimensia (Only)
AM/FM
0003
Auxiliary Component
0004
Phono
0005
Tape 1
0006
This remote may not operate all
models of the brands shown.
Note the difference between the TV
and VCR on-screen displays to see
which one the remote is operating.
Advertisement
Table of Contents
