RCA VR701 User Manual page 8

(Continued from previous page)
If the menu does not appear:
Make sure the TV is tuned to the same channel as the
CH. 314 switch or the TV's video input channel (see "How
to Find Your TV's Video Input Channel" in the
References section of this manual for more information).
• Make sure the VCR indicator is on in the VCR's front
display if the VCR is connected using the ANT. IN and
RF OUT jacks.
• Check your connections to make sure they are correct
and snug.
If you chose to set up the VCR's options individually, then
go to the next section for specific menu instructions.
STEP 8: ACCESS THE MENUS
The MENU and number buttons let you access, select, and
change the VCR's display preferences. For example, to
select a different preferred on-screen language than the
one selected during the initial set up, do the following:
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR PLus+
2 Timer Recordings
3
Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 8to display the LANGUAGE menu.
LANGUAGE
Select a language.
1>English
2 Espa_ol
3 Fran_ais
Press MENU to continue
3. Using the remote control, press 1 for English, 2 for
Espafiol (Spanish), or 3 for Franq;ais (French).
All other on-screen menus are worked in similar ways by
using the remote control to follow on-screen instructions.
See the next section, Additional Set-Up Features, for
detailed information about accessing menus.
6