Table of Contents
Advertisement
References
Trouble Checks
Trouble
Remote
Buttons don't work when you
press them
Checks
and Adjustments
Press TV to set the remote to control the TV. See buttons on page 6-7.
Works part or none of the
time
Can't select certain channel
Sound
Noisy stereo reception
Picture
okay, no sound
Picture okay, sound poor
No stereo on stereo station
TV Turns
on or off
Turns off by itself
Turns on by itself
Does not turn off at
Alarm Time
Clear the path between
the remote and TV of any objects.
Aim the remote at the component
you are trying to control.
Press TV so remote will control TV.
Make sure batteries
in the remote are not dead.
See if batteries
are placed in remote
correctly.
See batteries, page 2.
Press number
buttons.
Channel may not be in memory.
See autoprogram
on page 20.
Make sure TV/VCR
switch on VCR is in the TV position.
For numbers
over 100, press and hold I until 1-- appears,
then press the
other two numbers.
Set Cable/Air
feature to Cable for channels
higher than 69. See page 27.
Turn Stereo off. The stereo broadcast
may not be clear. See page 18.
Press VOLUME + or MUTE to restore sound.
Make sure TV's speakers
are on. Details are on page 19.
Try another channel.
Tryadjusting
the Tone. See page 18.
Change
Stereo to off. The stereo broadcast
may not be clear. See page 18.
Make sure Stereo is turned
on. See page 18.
Check Sleep Timer.
See sleep timer on page 22.
Wait 30 seconds
and turn on again, a power surge may have occured.
Check Alarm Off time.
See alarm clock on page 23.
Check Alarm On Time. See alarm clock on page 23.
Check clock time.
See clock on page 3.
Make sure alarm is turned
on or off. See alarm clock on page 23.
Check clock time.
See clock on page 3.
31
Advertisement
Table of Contents
