Table of Contents
Advertisement
Using Your TV and Remote
With Audio Equipment:
Programming
and Basic Operation
Refer to the Connection Book or your Audio equipment owner's manual to hook
up your audio equipment.
Your remote controls only RCA audio equipment
such as a radio, CD player, tape player, turntable,
or amplifier.
The
remote may need to be programmed
for your equipment.
This remote
may not operate all models of brands
listed below.
Use the codes below or
on the sheet packed in with your remote.
Program
the remote for
audio equipment
Basic Operation
Audio
Codes
RCA/Dimensia
AM/FM ........................... 03
CD ................ 2 .................. 07
Tape ................................. 06
Phono .............................. 05
Aux .................................. 04
REW
PLAY
FF
REC
STOP
PAUSE
A. Point the remote at the audio
equipment and hold AUDIO.
B.
Enter the code from the code
list.
C. Release AUDIO.
D. Press POWER to turn it on. If
nothing happens, try pressing
AUDIO and then POWER.
E. Repeat A-D with another code
if the first one does not work.
A.
B.
C.
D°
Point the remote at the audio
equipment
and press AUDIO.
Press POWER to turn it on.
Use the buttons
on the remote
that relate to audio functions.
Not all buttons
highlighted
may work with your
equipment.
Turn the audio equipment
off
using the audio component's
power off button.
15
Advertisement
Table of Contents
