Advertisement
3. Observe
fastener
icon (A) Fig. 19A. Insert
fasteners
(B) Fig. 19A with
points
down
(C) Fig.
19A. Slide
fasteners
forward
to the front
of the
magazine. The magazine will hold two full strips of fasteners.
IMPORTANT"
Fasteners
must point in the same direction
as they will be
driven.
4. Feed the strip of fasteners
into the magazine ("T" slot), until they are past
the spring (A) Fig. 20.
5.
Pull the follower
(B) Fig. 21, all the way to the rear of the magazine and
release. The follower will apply pressure to the strip of nails to feed it into the
driving mechanism.
6. Adjust directional
exhaust
deflector
(A) Fig. 22, so that the exhaust
air
blast will be directed
away from the operator.
The exhaust deflector
provides
seven
detented
positions
for directing
the exhaust
blast away from the
operator.
Grasp the deflector
and rotate
it to the desired
position
for the
current application.
Fig. 19A
Fig. 21
Fig.23
8
Advertisement
