Pioneer LaserDisc CLD-D504 Operating Instructions Manual page 9
Cd cdv ld player
Hide thumbs
Also See for LaserDisc CLD-D504:
- Operating instruction (28 pages) ,
- Service manual (55 pages)
Table of Contents
Advertisement
q
Connection with a TV set equipped only with an antenna terminal
Using the optional RF modulator (model JA-RF3L), connect the VHF ADAPTER terminal of the player to the antenna terminal.
CONNECTIONS
]
RF modulator
JA-RF3L (optional)
•
Set the channel settings of the RF modulator and -IV to the same channel.
•
When the power of the player is switched
on, the LD/CDV/CD playback screen appears. The TV audio is in monaural.
•
Switch off the power of the player when watching
the TV.
•
With this connection scheme, it is not possible to watch a broadcast TV program while playing an LD/CDV/CD.
For details,
read the Instruction
manual
of the JA-RF3L.
I NOTE
:
With some TV sets, stripe noise may be observed on the TV screen when an LD is played. In this case, move the antenna cable away from
the power cord until the noise disappears.
(_AC-3 RF OUT terminal :
This terminal is intended for use with Dolby AC-3 compo-
nents (.1) planned for future release. With this terminal,
you will be able to connect an AC-3 RF input of amplifiers
and surround
processors,
and playback
laser discs for-
matted with Dolby AC-3 1,2).
(* 1) }ndicated w_th ,DI_j_
IFor hardware_
(*2) Indicated with _
(For software)
•
You cannot playback
currently
available
laser discs,
laser disc players, AV amplifiers,
etc., with this termi-
nal.
•
Do not connect this terminals to the audio input termi-
nal of a normal stereo or AV amplifiers.
• ATTENUATOR
switch
Usually,
set
this
switch
to the
OFF
position.
Set
tO ON
when
the
audio
is distorted
during
karaoke
singing.
ATI'ENUATOR_
Lo,, o.j
I
Usually OFF
J
9
<VRB1147>
Hide quick links:
Advertisement
Table of Contents
