Multi-Aspect Setting For Wide Screen Tv Software; Dvds - Pioneer DVL-909 Operating Instructions Manual

Setting is possible when a DVD is loaded.
/_. Press _ when the player is in the
STOP mode.
_1_ _ _._ .L I
12MeNU I
4 OUTPUT I
• Main Menu indications are displayed
2, Select initial setting with /_.
I_ MAIN ]
SETUp
_4c_ I
3. Press _.
IEfflAL
• Initial setting indications are displayed
4. Select Multi Aspect with _.
5, Press _.
P Aspect indications are displayed
_, Select the desired mode (Pan & Scan,
Letterbox, Wide) with _.
7, Press _.
• Switch to the desired screen
With DVDs enabling switching between aspect ratios, select the
appropnate one for your TV
F
Aspect i Wide TV (!6:9)
Disc svvitching
T
Wide I I_
169 Pan&Scani:
I
Letterbox
43 _
RegularTV (4:3)
Selecting E_] in the chart above assures correct aspect ratio for
the TV used
Whether or not aspect ratio can be changed depends on the disc
Confirm by referring to the disc's jacket
With disc not enabling aspect ratio changing, make adjustments
with the TV.
• If there _sa power outage or the power cord is disconnected
while power to the player is ON, memorized settings are erased
When disconnecting the power cord, be sure to press POWER
button on the main unit and the remote control until "OFF" is
no longer indicated in the display
--CD
• The width-to height ratio of conventional TVs is 4:3, while the
width-to-height ratio of wide screen and Hi-Vision TVs is 16:9
This width to height ratio is called the aspect ratio
Multi-Aspect Setting for Wide
Screen TV Software
<VRB1186>