Playing Dvds, Cds And Video Cds - Pioneer DVL-909 Operating Instructions Manual

_CDj
Press the POWER
button.
• The STANDBY indicator goes out
-O
_e So as not to spoil the atmosphere of a video,
you can switch the display OFF by pressing
| the FL OFF button If you do this, the
indicator above the button lights
i FL OFF
o
0 ....... •
Press the DVD/CD _A
button.
• The DVD/CD disc table comes out.
• The LD disc table and the DVD/CD
disc table come out if you press
the remote controls OPEN/CLOSE
--_button•
Load a disc.
• Load a disc with the label side
facing up, using the disc table
guide to align the disc.
• You cannot play DVDs that have no region
number (refer to page 56)
• You cannot play DVDs that contain anything
other than DVD-video data
• During operation, the following marks may
appear on the TV screen
_jl :When you perform an operation that is
not possible with the player•
I_ :When you perform an operation that is
not possible with the disc
I
• The time taken for playback to start may differ
depending on the type of disc previously
played and the type of disc currently loaded
Press the PLAY/
PAUSE D,/II button.
• Press the PLAY/_- button on the
"_ remote control unit
• Depending on the disc, a menu
may be displayed• If a menu is
displayed, refer to page 16,
button button
- PLAY _- button
FL OFF button
PLAY/PAUSEI_/II button
DVD/CD& button
e_
STANDBY indicator DVD/CD disc table
Playing DVDs, CDs and Video CDs
<VRB1186>