Table of Contents
Advertisement
Reception
Some TV programs are broadcast with stereo audio or a
Second Audio Program (SAP) which offers a second language.
The reception
feature
lets you select the type of audio you want
to record. Press 1 to switch between Reception: STEREO, MONO,
and SAR
•
Select STEREO for normal or stereo broadcast
TV recording.
•
Select MONO if the stereo signal is weak and the sound is
too noisy.
•
Select SAP to record a Second Audio Program
instead of
normal audio on both the Hi-Fi and linear tracks.
Tape Playback
The VCR records the same audio on both Hi-Fi and linear tracks
on the tape. Hi-Fi sound is recorded on a separate left and right
stereo channels. Monaural
sound is recorded on the linear track.
Press 2 to switch between Tape Playback: HI-FI, LINEAR, and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television
or
amplifier/receiver
using the audio/video
jacks. The Tape Playback
feature
lets you select which audio you use during playback.
•
Select HI-FI to play back sound recorded
on the Hi-Fi track
and for normal
use.
•
Select LINEAR to play back sound recorded on a linear
monaural
track, such as a Second Audio Program
(SAP),
or a dubbed voice.
•
Select MIX to play back the sound recorded on both the
linear and Hi-Fi tracks, sound-on-sound.
To receive Hi-Fi stereo sound, use
audio-video cables with a compatible
TV or receiver. Using only the RF
OUT jack will not produce stereo
sound.
47
Advertisement
Table of Contents
