Table of Contents
Advertisement
Reception
Some TV programs
are broadcast
with stereo audio or a second
audio program
(SAP) which offers a second language. The
Reception feature lets you select the type of audio you want to
record. Press 1 to switch between Reception:
STEREO, MONO,
and SAP.
•
Select STEREO for normal or stereo broadcast
TV recording.
•
Select MONO if the stereo signal is weak and the sound is
too noisy.
•
Select SAP to record a second audio program
instead of the
normal audio on both the hi-fi and linear tracks.
Tape
Playback
The VCR records the same audio on both the Hi-Fi and linear
tracks on the tape. Hi-Fi sound is recorded
on separate left and
right stereo channels.
Monaural
sound is recorded
on the linear
track. Press 2 to switch betweenTape
Playback: HI-FI, LINEAR
and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television
or
amplifier/receiver
using the audio/video
jacks. The Tape
Playback feature lets you select which audio you play back.
•
Select HI-FI to play back sound recorded
on the Hi-Fi track
and for normal
use.
•
Select
LINEAR
to play back the sound
recorded
on the linear
monaural
track,
such as a second
audio
program
(SAP),
or a
dubbed
voice-over.
•
Select
MIX to play back the sound
recorded
on both
the
linear
track and the Hi-Fi track,
sound-on-sound.
To receive Hi-Fi stereo sound, use
1
audio-video cables with a compatible
TV or receiver. Use of the RF OUT jack
only will not produce stereo sound.
38
Advertisement
Table of Contents
