Will not record
•
Check to make sure the safety tab is intact.
•
Check to make sure the VCR is not in the line mode. Press INPUT
on the remote.
Internal
clock shows incorrect
time or date
•
Power interruption.
Make sure cable box or VCR is tuned to channel
carrying
the XDS information.
•
Check to make sure the clock is set accurately
(check AM/PM and
date).
•
Check Daylight-Saving
setting. The clock may have adjusted
for
daylight-saving
time.
Time
did not adjttst
for daylight-saving
time
•
Check to make sure daylight-saving
feature
is set correctly.
VCR makes noise when stopped
•
VCR is removing
tape from
heads.
This is normal.
The head
cylinder
inside the VCR will continue
to rotate for a few minutes
after you put the VCR in the stop
mode.
Will not Auto Channel
Search
active
channels
correctly
•
Check to make sure the antenna connections
are secure and
correct.
Check to make sure the Signal Type: CABLE/ANTENNA
feature is
set correctly.
If Detect Automatically
was selected for the Signal Type in the
AUTO CHANNEL SEARCH menu, try using either CABLE TV or
ANTENNA
instead.
•
May not be necessary
if using a cable box for all channels.
Contact
your local cable company
for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot
select
channels
over 69
•
Cable channels
over 69 can only be selected if Signal Type: CABLE/
ANTENNA
feature is set to CABLE.
Cassette
with safety tab removed
does not start to play automatically
•
Check to make sure the Auto Play ON/OFF feature
is set to ON.
62