Back Panel; Indicator Panel - GE VG2042 User Manual

Back Panel
AUDIO VIDEO IN FROM (_
OUT (_--(_ ANT.
VHF/UHF
OUT TO TV (_
IN1 (_--(_ 3CH, 4
IIZ
3 CH. 4 Switch Selects the channel to which you will tune the
"IV to see the VCR picture if you connect the VCR using the
ANT.IN and RF OUT jacks.
AUDIO and VIDEO IN Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT on the remote to select.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a'lV orVCR, when it is connected to
these jacks.
IN FROM ANT. Jack Receives a signal from an antenna or
cable system when attached.
OUTTOTV Jack Passes signal toTV using the cable supplied.
Indicator Panel
POWER VCR TIMER RECORD
POWER Indicator Lights when the VCR is turned on.
RECORD Indicator Lights when the VCR is recording.
TIMER Indicator Lights during an express or timer recording, or
when theVCR is set for a timer recording and theVCR is turned off.
Flashes when a timer recording is set, and there is no cassette in
the VCR, and when the clock is not set.
VCR Indicator (Applies Only if the VCR Viewing Channel is 3
or 4). Press theTV.VCR button to turn on or off.
• VCR indicator on: Picture from VCR.
• VCR indicator off: Picture fromTV channel.
47