Slow Motion; Zero Search; Commercial Scan - RCA VR327 User Manual

Using the Playback Features
Zero Search
The zero search feature allows you to quickly return to a counter reading
of 0:00:00 at any spot on the tape. This is especially convenient when
you want to watch a segment of the tape several times.
1. Insert the prerecorded tape.
2. Press DISPLAY twice to display only the time counter on the
TV screen.
3. Use PLAY, F.FWD, or REW to advance to the spot on the
tape where you want to return to quickly.
4. Press CLEAR on the remote to reset the time counter to
0:00:00.
5. Continue playing the tape.
6. Press STOP.
7. Press SEARCH in the stop mode to display the ZERO
SEARCH menu on the TV screen. The current time counter
is displayed.
8. Press REW or F.FWD to return to 0:00:00. The time counter
is displayed in the upper right corner of the TV screen
during search.
ZERO SEARCH
CURRENT TAPE COUNTER IS
2:17:25
PRESS REW TO GO TO 0:00
PRESS SEARCH TO EXIT
ZERO SEARCH
CURRENT TAPE COUNTER IS
-2:17:25
PRESS FWD TO GO TO 0:00
PRESS SEARCH TO EXIT
Commercial Scan
This is useful for scanning commercials or short program segments.
1. Press SEARCH once during playback to advance
the tape approximately 60 seconds.
Slow Motion
You can view the picture in slow motion during play or play pause.
Sound is turned off during slow-motion playback. Slow motion works
best in the SLP speed.
1. Press SLOW to begin slow-motion playback.
2. Use TRACKING up or down to adjust the streaks for the best
possible picture.
3. Press SLOW or PLAY to return to playback.
The VCR will automatically switch from slow-motion
playback to stop after a few minutes.
15