Table of Contents
Advertisement
Connecting TV to
Audio System (select
models
only)
1.
Use this hookup to:
1
Hear sound through the speakers
|
connected to the amplifier.
I
2.
Select accessories
needed.
Or&,r formisonpage19.
A. Two single audio cables.
3. Connect as shown.
A,
Connect audio/_deo
cables.
B.
Insert plugs completely
to avoid
audio hum.
4. Place speakers.
A.
Place speakers
at least eight inches
away from the TV to prevent color
streaks in the picture.
5. Operate amplifier.
A.
Turn on TV and
amplifier.
B.
Press TV button on front of
amplifier.
C.
Adjust the amplifier's
volume for
normal
li_ening.
D.
Control sound with the VOLUME
bulitons on the TV's remote.
E.
Turn off the TV's internal
speakers if
desired with theSPEAKERS
ON/OFF feature deseX_bed in the
User's Guide.
6. Follow the steps In the Startup
section of your User's Guide.
A
SPEAKER
AUDIO OUT Jaokl
are not on ell models.
INPUTS
This set incorporates
special circuits
which enhance
stereo imaging and
effect when used with the TV's own
speakers.
If external speakers
are
used, the stereo effect may decrease.
W
SPEAKER
17
Advertisement
Table of Contents
