Table of Contents
Advertisement
•
The CHANNEL
and number
buttons
(0-9} _ill automatically
control the small PIP image.
You cannot
change
channels
on
the main image.
When you press the PIP button
on the remote
to turn off the PIP
image:
•
CHANNEL,
the number
buttons,
and all other functions
will
work normally
again.
[:>Important:
[:>Important:
If you turn
offthe
TV while it is set to EXT-1, iL will return
to the
last channel
you viewed on Antenna-A
or AnLelma-B
when you
turn the TV back on.
If you leave the TV turned
on, set to EXT-1, but the TV is not
receiving
a signal
on EXT-1, it will automatically
turn off after five
minutes.
(If you use a TV menu during
this time, the TV will turn
off five minutes
after you stop using the menus.)
[:>Important:
You should not press
the PIP button
while you are watching
a
channel
that is not receiving
any broadcasts.
You will not be able
to see the small PIP image,
and you will not be able to change
channels
on the main image.
You may need to turn off the TV and
turn
it back on, change
to a chaImel that is rec_iving
a broadcast,
and begin again.
Using
the Active A/V Network
Features
93
Advertisement
Table of Contents
