Mitsubishi CS-40503 Owner's Manual page 51

Adjusting the color purity
Your MITSUBISHI color television has a large screen picture tube
and color purity may be affected slightly by the earth's magnetic
field. For best results, follow the instruction below for color purity
adjustment.
NEUTRAL _,2 1 J
E>Important:
O Turn off the TV set.
O Select the desired location and install the set. Determine the
compass direction where the set :is facing. Tile direction is
determined from the front of the screen facing forward.
Select the position for the DIRECTION switch according to the
chart below.
TV SET DIRECTION
North
North East
North West
South
South East
South West
East
West
DIRECTION SWITCH
S NEUTRAL N
X
X
X
X
X
X
X
X
STRENGTH SWITCH
-x.
J
O Turn the TV on, and check the color performance.
If a color impurity is still present, change the STRENGTH
switch to position "1". If a color impurity persists after chang-
ing the STRENGTH switch position, press the degauss button
after a few minutes.
The color purity switches nmst be adjusted each time the set is
moved to a new location.
If a color impurity still persists after the re-adjustment of color
purity switches, contact your MITSUBISttI dealer or
MITSUBISHI Authorized Warranty Service Center.
Getting Started 47