Mitsubishi Electric DLP C9 Series Owner's Manual page 68

68 Appendices
Resolving CEC Conflicts
Because each manufacturer selects which CEC func-
tions to support, some devices can conflict with other
devices. If control conflicts arise, you can:
• Turn off TV control of an individual CEC-enabled
device (see below).
Turn off CEC in the setup menu of one of the
devices.
Turning Off the TV's HDMI Control of a CEC Device
1, Press MENUon the TV remote control.
Highlight Inputs > HDMI Control and press ENTER
to open the menu.
3, Move to the device name and press A V to select
Off to turn off the TV's ability to control the device.
4, Press MENUto clear the menu.
Inputs > HDMI Control menu
Removing an HDMI Device
1, Power off the device.
Disconnect the HDMI cable.
3, Press MENUon the TV remote control to enter the
TV main menu.
4, Highlight Inputs > Name and press ENTER to open
the menu.
Select Delete from the HDMI input names.
6, Press MENUto clear the menus.
Inputs > Name menu with Delete selected for HDMI-3,
Using HDMI Control
As an example of using HDMI Control, press PLAYon
the device itself to:
• Power on the TV
Switch to the device (no need to display the
Activity menu)
Begin play of the device
Direct Keys
Test your equipment with the TV's remote control to
find additional supported commands. See the table
below for commands that may be available, depending
on the individual device.
CEC=enabled VCR, DVD, and DVR functions that
may be available:
"41_AT L CNANNELUP/DN J GUIDE
@ ®
...... ........................................... .......... ................
If you have a CEC-enabled A/V receiver, CEC-enabled
devices connected to the A/V receiver with an HDMI
cable may also be controllable. They can be selected
from the TV's Activity menu.
CEC=enabled A/V receiver functions that may be
available:
= Try the VOLUME UP/DOWN, M UTE,and menu-navigation
keys.
To open the A/V receiver menu, follow these steps:
1. While watching TV, press MORE then 9 (AUDIO).
2. Press A until the Speakers option displays.
3. Press _ to select AVR as the source.
4. Press MORE and then 1 (MENU) t o display the
menu.
The MORE Menu
Press MOREon the TV's remote control to see a menu
of additional supported functions for the current
CEC-enabled device. To issue a command, press the
number key indicated in the menu.
MORE key: Sample menu for
a CEC-enabled DVD player