Mitsubishi Electric DLP C9 Series Owner's Manual page 12

12 1. Basic Setup and Operation
Selecting an input to Watch
1, Press ACTIVITY.
Press V A and _ to highlight an input.
3, Press ENTER to switch to the input.
Watching Broadcast TV
TV Connected to an Antenna, Direct Cable, Cable
Box, Set-Top Box, or Satellite Receiver
1, Select an input to watch from the Activity menu's
Watch TV group.
Note: For more about the Activity menu, see page 21.
Watching DVDs or Videos
TV Connected to a DVD Player, DVR, or VCR
Press ACTIVITY and select a movie source from the
Activity menu. If you named devices during Auto Input
Sensing, select the input from the Watch Movie group.
Activity menu, DVD input selected
Activity menu, antenna input selected
2, Tune to a channel.
• Enter the channel number using the number
keys on the remote control and press ENTER.
For a two-part digital channel, such as 3-1,
press 3 _ 1 to enter a dash (separator).
Press CHANNEL UP/CHANNEL DN to change chan-
nels one channel at a time.
Press (_) (LAST)to switch back to the previ-
ously tuned channel.
Antenna or Direct Cable Only. Press GUIDE to
display ChanneIView channel listings, highlight
a channel number, and press ENTER to tune.