Maytag MSD2559XEM01 User Instructions page 6

Table of Contents

Advertisement

Available languages

Available languages

• Wait a tleast 2 4hours between adjustments.
Recheck the
temperatures
before o ther a djustments
aremade.
Toview andadjust thesetpoints, press a ndhold theTEMP
button for3seconds. When adjust mode isactivated, adjusting
information will a ppear onthedisplay screen.
NOTE: Toview Celsius temperatures,
press t heLIGHT b utton
when adjust mode isactivated. Toreturn thedisplay s etting to
Fahrenheit,
press L IGHT a gain.
• When adjust mode isactivated, thedisplay screen s hows t he
refrigerator
setpoint a nd"FRIDGE" appears.
• Press L OCK toraise thesetpoint, o rpress F AST I CE tolower
thesetpoint.
• When y ouhave finished v iewing (and adjusting ifdesired) the
refrigerator
setpoint, p ress T EMP tochange t hedisplay to
show thefreezer setpoint. W hen t hezone hasbeen c hanged,
"FREEZER"
appears onthedisplay s creen.
• Press L OCK toraise thesetpoint, o rpress F AST I CE tolower
thesetpoint.
• When y ouhave finished v iewing ( and adjusting ifdesired)
boththerefrigerator and freezer setpoints, press F ILTER to
save thesettings.
NOTE: Toexit w ithout saving c hanges, press I CE TYPE at
anytime while inadjust mode, orallow about 6 0seconds of
inactivity andadjust mode will t urnoffautomatically.
When a djusting temperature
setpoints, use thefollowing chart a s
aguide.
CONDITION:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm
REFRIGERATOR Setting
1° lower
FREEZER too cold
FREEZER Setting
1° higher
FREEZER too warm /
FREEZER Setting
Too little ice
1° lower
The set point range for the refrigerator is 33°F to 45°F (0°C to
7°C). The set point range for the freezer is -5°F to 5°F (-21 °C to
-15°C).
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is
turned off.
To turn cooling off, press and hold the LOCK and FILTER
buttons at the same time for 3 seconds.
IMPORTANT: To avoid unintentionally
locking the dispenser
or changing other settings, be sure to press both buttons at
exactly the same time.
When cooling is off, "COOLING OFF" will appear on the
display screen.
Press and hold LOCK and FILTER for 3 seconds again to turn
cooling back on.
Additional
Features
Fast Ice
The Fast Ice feature assists with temporary periods of heavy ice
use by increasing ice production
over a 24-hour period.
IMPORTANT: This feature only works if the ice maker is turned
on. See "Ice Maker and Storage Bin."
Press FAST ICE to turn on the Fast Ice feature. When the
feature is on, the Fast Ice icon will appear on the dispenser
display screen. The Fast Ice setting will remain on for
24 hours unless manually turned off.
To manually turn off the Fast Ice feature, press FAST ICE
again or adjust the freezer temperature set point. The Fast Ice
icon will disappear when the feature is off.
NOTE: If increased ice production
is desired at all times, change
the freezer set point to a lower setting. Setting the freezer to a
colder temperature
may make some foods, such as ice cream,
harder.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the
refrigerator or freezer door is open for 5 minutes and the product
cooling is turned on. The alarm will repeat every 2 minutes. Close
both doors to turn it off. The feature then resets and will
reactivate when either door is left open again for 5 minutes.
NOTE: To mute the audible alarm while keeping the doors open,
such as while cleaning the inside of the refrigerator, press any
button on the control panel. The alarm sound will be temporarily
turned off, but the Door Ajar icon will still be displayed on the
dispenser control panel.
The control can be adjusted to properly chill meats or vegetables.
The air inside the pan is cooled to avoid "spot" freezing and can
be set to keep meats at the National Livestock and Meat Board
recommended
storage temperatures
of 28 ° to 32°F (-2 ° to 0°C).
The convertible vegetable/meat
drawer control comes preset at
the lowest meat setting.
To store meat:
Set the control to one of the three MEAT settings to store meat at
its optimal storage temperature.
To store vegetables:
Set the control to VEG to store vegetables at their optimal
storage temperatures.
NOTE: If food starts to freeze, move the control to the left (less
cold). Remember to wait 24 hours between adjustments.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents