Switch on and set up the TV
TheT_/turns
on automatically after the power cord is inserted into the
power connector, The following screen appears:
PHIL|PS
Next
Press the GREEN
button
on your
remote
control
to proceed.
Follow the on-screen instructions to select your language and complete
yourTV
setup.
•
if you connect
7ourTV
to a cable box or satellite set4op
box, you do not need to install
channels, Press the red button
on the remote
control
to exit this stage of the setup,
Finish the setup by selecting your location;
•
If you choose [Retail store] your settings are erased each time you
turn offtheTV.
Use this mode for retail store displays only.
•
If you choose [Home]
you are guided throu£h a choice of picture
display options. Press the left or right cursor buttons to select your
preferred
screen.
10
EN