Table of Contents
Advertisement
Poor reception
the proximity
of mountains
or high buildings may be responsible
for ghost
_ictures, echoing or shadows, in this case, try manually adjusting your picture: see
'fine tuning" (p.7) or modify the orientation of the outside aerial Does your
lntenna enable you to receive broadcasts in this frequency range (UHF orVHF
:_and)?
No picture
-lave you connected
the aerial socket properly?
Have you chosen the right
_ystem? (p. 7). Poorly connected
euroconnector
cables or aerial sockets are often
:he cause of picture or sound problems
(sometimes
the connectors
can become
talf disconnected
if the TV set is moved or turned).
Check all connections.
Peripheral
_'ou have not selected the right socket with the _
key: S-VHS2 instead of EXT2.
equipment
gives a
ro play a video cassette, check that it has been recorded
under the same
black and white
_tandard (PAL, SECAM, NTSC) which can be replayed by the video recorder.
)ieture
No sound
f on certain channelsyou receive a picture but no sound, this means that you do not have
_e correctTV system. Modify the SYSTEM setting (p. 7).
the amplifier
connected to the TV does not deliver any sound? Check that you
_ave not confused the audio output with the audio input.
PC and PIP modes
_heck that you have configured the computer on a compatible display resolution
don't work
?
'_seep. 15).
T'ou can't get the radio sound in PC mode? When
P{P is active the sound is
:oreed toTV. You must de-activate PIP,go into radio mode and then come back
:o PC mode.
Remote
control
rheTV
set does not react to the remote
control; the indicator on the set no
onger flashes when you use the remote control? Replace the batteries.
Standby
When you switch theTV set on it remains in standby mode and the indication
_OCKED is displayed when you use the keys on theTV set?The CHILD LOCK
_unction is switched on (p. 10).
fthe
set receives no signal for t5 rains, it automatically
goes into standby mode.
[o save power, your set is fitted with components that give it a very low power
:onsumption when in standby mode (less than 1 W).
Cleaning
the set
Dnly use a clean, soft and lint-free cloth to clean the screen and the casing of your
_et.Do not use alcohol-based or solvent-based products.
Recycling
i'he materials used in your set are either reusable or can be recycled.
i'o minimise
environmental
waste, specialist companies collect used appliances
md dismantle them after retrieving
any materials that can be used again (ask your
Jealer for further
details).
Still no results?
9isconnect
the mains plug of the TV for 30 seconds then reconnect
it.
f your TV set breaks down, never attempt to repair it yourself: contact your
Jealer's after-sales service.
16
Advertisement
Table of Contents
