Pentax K-r Operating Manual page 24

3
#
12 EVCompensation 18 Sensitivity
13 Histogram 19 Remaining image storage capacity
14 AE Lock 20 Main face detection frame (Face
15 Shutter speed Detection AF)
16 Aperture value 21 Face detection frame (Face
17 EV bar Detection AF)
* Indicator 11 (Phase Difference AF frame) is displayed in white during
Live View. When the subject is in focus, a green square frame is
displayed instead. It turns red when the subject is not in focus. It is not
displayed when the focus mode is set to MF.
* When 15, 16, and 18 can be changed, • appears next to the set value.
* Indicators 20 and 21 are displayed when [Autofocus Method] is set to
[_@_ and the camera detects person's face(s). (Up to 16 face recognition
frames are displayed on the monitor.)
Available operations
OK button When the focusing area is set to !_ (Select) and
[Autofocus Method] is set to [@] or !_ press this button
to disable direct key operation of the four-way controller
(• • _ • ) and enable changing the AF point.
Four-way Changes the AF point when the AF point can be changed.
controller Press the OK button to return AF point to the center of the
(• • • • ) AF frame.
Press and hold Disables changing the AF point and enables direct key
OK button operation of the four-way controller (• • • • ).
INFO button Enlarges the image to 2, 4, or 6 times (when the focus mode is
set to ME, enlarges the image to 2, 4, 6, 8, or 10 times). Use
the four-way controller (• • _ • ) to move the display area,
and press the (_ button to return the display area to the center.
(Available only when [Green Button] is assigned to the
button in [Green Button] of the [1_ Rec. Mode 4] menu (p.I97).)
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to MF, turn the focusing ring until the subject
is clearly visible on the focusing screen.
Press the shutter release button fully.
The picture istaken.