Using The Self-Timer - Pentax Optio WG-1 GPS Operating Manual

Hide thumbs Also See for Optio WG-1 GPS:
Table of Contents

Advertisement

In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture
with the self-timer.
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
_s
seconds after the shutter release button is pressed.
Shutter release
button
Four-way controller
OK button
1'
Press the four-way
controller (A) in a mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (< I_ ) to select ® and press
the four-way
controller (•).
3
Use the four-way
controller
(• I_) to select ® or 6_ and
press the OK button.
The camera is ready to take the
picture using the self-timer.
When the camera detects
a person's
face, the Face Detection
function
is
activated
and the face detection
frame appears
(p.80).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents