Maytag SkyBox MBV1976AA Manual page 8

SkyBo×
TM
Personal Beverage
Vendor Top and Door
Assembmy (Select Packaging OnlyJ
Carefully unpack the SkyBox
TM
personal beverage
vendor from the packaging.
If needed, follow these instructions for attaching the
door to the main unit of your SkyBox
TM
personal
beverage vendor.
Parts
Top Cover ......................................... 1
Main Unit ......................................... 1
Door ................................................... 1
Door Wire Harness ....................... 1
STEP 1 - Attach Top Cover
, Slide hooks at front of top panel into slots at front of
main unit.
Press top cover down in back so 3 tabs snap
securely into place onto back of main unit.
To
STEP 2 - Attach Door
Align hinges of door to hinge
posts on the main unit. Hold
door at an angle (greater
than 90°J from the main unit
opening. (Note: For your safety,
the door will not attach or
detach at a 90 ° angle.)
Slide hinges down onto hinge
posts. Door will slide on easily.
DO NOT FORCE.
STEP 3 - Attach Door Wire Harness
Main
Unit
W ire
Harness
Attach one end of door wire harness to plug-in on
lower left corner of main unit opening, aligning plug
with small tab facing up to fit plugqn. Note: plug will
only fit one direction. DO NOT FORCE.
Attach other end of door wire harness to plug-in on
lower right corner of door, aligning plug with small
tab facing up to fit plug-in. Note: plug will only fit
one direction. DO NOT FORCE.