Direct Remote Operation - Panasonic KX-TC1741B Manual

Remote Operation from a Touch Tone Phone
Direct Remote Operation
Once you have entered the remote code, you can also controlyour unit by
direct commands instead of using the voice menu. To end the remote
operation, hang up anytime. "
Direct commands
NEW MESSAGE _ • Only new messages are played back,
PLAYBACK
ALL MESSAGE _ • All messages are played back.
PLAYBACK
OL J
REPEAT _ • The current message is repeated.
(During playback)
SKIP _ • The current message is skipped.
(During playback) _ The next message is played.
STOP _ • Operation is stopped temporarily.
• To resume operation, enter a direct
command within 15 seconds, or the
voice menu will start.
GREETING _ • A long beep sounds.
MESSAGE
RECORDING 4,
RECORD
4,
• After the beep, talk immediatelyfor up
to 2 minutes.
• The recarding is stopped.
• The recorded message is played.
ERASING A _ _ • The current message is erased.
SPECIFIC • A short beep will sound and the next
MESSAGE message will be played.
(During playback)
ERASING ALL _ _ • All recorded messages are erased.
MESSAGES _ _ • A long beep sounds and "No messages"
is heard.
?0