Panasonic CT-36HX41U Operating Instructions Manual page 9

INSTALLA T!ON
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
VCR
r
VIDEO OUT
,
', AOD :
IANT OUTPUT
I
CABLES NOT SUPPLIED
___....__CO__NECTIONS ON BACK OF TV
Use either the
S-Video or Video
connection.
INPUT _
Incoming Cable @ @
I
-@@@
@@
DIGITAL WINPUT
Note: The remote control must be programmed with supplied codes to operate the VCR and cable box.
See Programming the Remote Control in the Remote Control Quick Reference Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note: To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chan.
Recording a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you want to record.
6. Begin recording.
Note: To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a television program (except another premium cable
channel).
D