Table of Contents
Advertisement
INS
TA LLA TION
Installation
Television
Location
Follow these recommendations
before deciding the location of your television.
,_- Avoid excessive sunlight or bright lights, including reflections.
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
Fluorescent lighting may reduce remote control transmitting range.
Keep away from magnetic equipment, including motors, fans and external speakers.
CAUTION:
Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over. In order to avoid injury to children, never place your television
receiver on a piece of furniture that is capable of
being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.
@
CT-27D32, CT-27D32U:
CAUTION: These television receivers for use only with PANASONIC TY-27G22M stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-32D32, CT-32D32U:
CAUTION: These television receivers for use only with PANASONIC TY-32G22M
stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-36D32, CT-36D32U:
CAUTION: These television receivers for use onlywith
PANASONIC TY-36G22M
stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
Optional
Cable Connections
Shielded
audio
and video cables should
be used between
components.
For best results:
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors that match your component connectors.
Avoid long cables to minimize interference.
AC Power
Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET
AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADE
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Polarized plug
PROTECT
POWER
CORDS
FROM BEING WALKED
ON, ROLLED
OVER, CRIMPED,
BENT OR PINCHED,
PARTICULARLY
AT PLUGS, CONVENIENCE
RECEPTACLES,
AND THE POINT WHERE THEY EXIT FROM THE APPARATUS•
Cable / Antenna
Connection
For proper
reception,
either a cable or antenna
connection
is required.
Cable Connection
Connect
the cable supplied
by your local cable company.
Note:
A cable converter box may be required for proper reception.
Check with your local cable company for
compatibility requirements.
Antenna
Connection
For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an
outdoor antenna is recommended.
Connect home antenna to ANT on the back of television.
Note:
Cable Mode is preset at the factory. Antenna users must change to TV mode in the Set Up Menu under
Prog Chan.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming
Cable from
Home Antenna
illl
Advertisement
Chapters
Table of Contents
