Panasonic Omnivision PV-V4523S Operating Instructions Manual page 9

Make the Audio/Video Connection as shown on page 3.
• You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.
TV
Stereo Amplifier
1 Press SAP/Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)
Press SAP/Hi-Fi repeatedly
to select desired mode.
• Refer to "Receivable
Broadcast Types" on page 4.
• Arrow indicates selection.
3
Make a recording.
See p. 5 of "Basic Operations" Instruction book.
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with an "((€"mark while the selected audio mode is
indicated with an arrow.
To display the broadcast signal being received,
-_ press DISPLAY*.
MTS Stereo and SAP broadcast
MultFchanne! Television Sound Stereo (main language)
and Secondary Audio Program (sub language)
broadcasts are being received simultaneously,
Select STEREO or SAP audio mode,
STOP 12 OOAM CH 02
0:00:00
(0STEREO • SP
STOP 12:00AM CI4 02
0:00:00
_(_ S TEREO • SP
STOP 12:00AM CI4 02
0:00:00
STEREO SP
STOP 12 OOAb' CH 02
0:00:00
STEREO SP
SAP
_ONO •
1 Start playback.
See p. 5 of "Basic Operations" Instruction book.
2
Press SAP/Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)
3
NIFI_L
NIF]_
_JO_MAL
• Arrow indicates
selection,
Press SAP/Hi-Fi repeatedly
to select desired mode.
• Select "HIFI(L!R)" or
"HIFI(L)" or "HIFI(R)" to
listen to stereo recordings in
stereo sound.
Select "NORMAL" for
monaural sound.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Select STEREO audio mode.
• If stereo broadcast is weak and display flickers,
select MDNO audio mode for possible better results.
SAP broadcast
Secondary Audio Program (sub language) broadcast.
Select SAP audio mode for the sub language,
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amp and speakers. (See page 4.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
MONO broadcast
Normal monaural sound broadcast,
Equipped with dl_-TV Noise Reduction for true I
MTS reproduction, dI=<TV Noise Reduction is
I
required for good stereo separation and audio
fidelity, dBx_ is a registered trademark, and is
licensed by d_ _ Technology Licensing.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.