Picture In Picture (Pip) Operation; Pip Operation With A Vcr And Cable Box - Panasonic CT-36G24 Manual

PICTURE IN PICTURE
(PIP) OPERA710 N
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR, Camcorder, etc.) is requiredto provide a second picture.
Connect your televisionto a VCR and Cable Box, as shown. (Some models
have only one video input and some models have an S-VIDEO video input,)
CABLES NOT SUPPLIED
Incomingcable
Note:
The Remote Control must be programmed with supplied codes to
operate the VCR and Cable Box. See Programming the Remote
Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note: The PIP picture is the same as the main picture, initia/ly
To view a different picture in the PIP frame:
• Press the W/VIDEO button on the Remote Control to select
the video PIP soume.
• Verify the CABLE BOX and VCR are ON and the VCR is
tuned to channel 3.
• Choose channels for the PIP frame by pressing the CBL
buttonon the Remote Control and using the numeric keypad
or CH up/down buttons.
• Choose channels for the Main Picture by pressing the TV
button on the Remote Controland using the numeric keypad
or CH up/down buttons.
\i/
SWAP Button
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for on
screen PiP and Main Picture sourcestatus.
Ha