LG 32LC6D Owner's Manual page 83

APPENDIX
10. Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
16. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 ' as shown below.
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 ' as shown below.
11. lint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
1Z Balance (Command:
kt)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Data Red: 0 - Green: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 ' as shown below.
12. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 ' as shown below.
w/e
18. Color Temperature (Command: k u)
To adjust color temperature.
You can also adjust color temperature in the PICTURE menu.
rT1
Z
X
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 ' as shown below.
i
13. OSD Select (Command: k I)
To select OSD (On Screen Display) on/off.
Data O: OSD off Data 1 : OSD on
14. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel controls on
the set.
Data O: Lock off Data 1 : Lock on
Data O: Medium 1: Coot 2:Warm 3: User
19. Red Adjustment (Command: k v)
To adjust red in color temperature.
Data Min: 0 _ Max: C8
* Refer to 'Real data mapping 2' as shown below.
20. Green Adjustment (Command: k w)
To adjust green in color temperature.
Data Min: 0 - Max: C8
* Refer to 'Real data mapping 2' as shown below.
If you're not using the remote control and front panel
controls on the TV, use this mode. When main power is on/
off, remote control lock is released.
IS. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 ' as shown.
*Real data mapping 1 *Real data mapping 2
O: Step 0 O: -20
5:-19
A: Step 10 (SET ID 10) A: -18
F: Step 15 (SET ID 15) 5F: -1
10: Step 16 (SET ID 16) 64:0
69:+1
65: Step 99 (SET ID 99)
64: Step 100 C3:+19
C8:+20
82