Setting The Clock; Set The Time Zone; Set The Daylight Saving Time; Set The Date And Time - Panasonic Palmcorder IQ PV-L606 Operating Instructions Manual

Setting the clock is divided into three sections; Set the Time Zone, Set the Daylight
Saving Time, and Set the Date and Time. Please follow instructions in the.order
presented.
Before you begin...
The Palmcorder is set to the Eastern
Standard time zone at the factory. If you
live in a different time Zone, follow the
steps below to change it. Then, when
traveling, rather than resetting the clock to
the local time, you can simply, set the
appropriate time zone.
DISPLAY
CLOCK
Time Zone chart
oo°oO°
• Connect the Palmcorder to a power source.
• Set the POWER switch to VCR or CAMERA.
Note:
CLOCK SET menu disappears if, after
activationl CLOCK SET UP A, DOWN • or
DISPLAY buttons are not pressed within 30
seconds.
The Palmcorder's clock may lose or gain up.
to two minutes per month. Please adjust as
necessary (refer to page 15).
press CLOCK SET UP • to display
the CLOCK SET menu.
Press UP • or DOWN • repeatedly
to selectil_"f=l!=[_l|hVjl=lV_[e]_,l=ll from
the CLOCK SET menu.
-/
"_ |
Pt_ VIA I_ - |
: I_t11-1I_PLAY _
Press DISPLAY to display the
SELECT TIME ZONE menu.
ATt.ANTIG PACIFIC:
• ..w.,
MOUNTAIN SAMOA
I SELL=CT: _ VIA KEY
Press UP • or DOWN • repeatedly
to select one of the eight time zones of
the location where you are using the
Palmcorder.
Press DISPLAY to fix the Time Zone.
The CLOCK SET menu appears.
To exit from the CLOCK SET
menu, select _ and press
DISPLAY.
Note:
I When you travel outside the eight time
zones shown in the time zone chart at
the left, please set the clock manually
(see page 15).
13