LG 26LX2R Owner's Manual page 55

09. Brightness (Command:h)
• To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission
[[k][h][ ][Set ID][ ][gata][Cr] ]
Data Min: 0 ~ Max: 64 (transmit by Hexadecimal code)
• Refer to 'Real data mapping 1 '. See page 54.
Acknowledqement
[[h][ ][Set Ig][ ][OK][gata][x] ]
10. Color
(Command:i)
• To adjust the screen color.
You can also adjust color in the Picture menu.
Transmission
[[k][i][ ][Set ID][ ][Data][Cr] I
Data Min: 0 ~ Max: 64 (transmit by Hexadecimal code)
• Refer to 'Real data mapping 1'. See page 54.
Acknowledqement
[[i][ ][Set ID][ ][OKl[Datal[x I I
11. Tint (Command:j)
• To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission
[[kl[j][ ][Set ID][ ][Datal[Cr] I
Data Min: 0 ~ Max: 64 (transmit by Hexadecimal code)
• Refer to 'Real data mapping 1'. See page 54,
Acknowlecioement
[[j][ ][Set ID][ ][OK][Data][x] I
12.
Sharpness (Command:k)
• To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission
[[k][k][ ][Set ID][ ][gata][Cr] J
Data Min: 0 - Max: 64 (transmit by Hexadecimal code
• Refer to 'Real data mapping 1'. See page 54.
Acknowledqement
L[k][
][Set ID][ ][OK][Data][x] J
13. OSD Select (Command:l)
• To select OSD (On Screen Display) mute on/off.
Transmission
[[k][I][ ][Set ID][ ][Data][Cr] ]
Data 0: OSD mute on 1: OSD mute off
Acknowledqement
[[I][ ][Set Ig][ ][OK][gata][x] ]
Reference
14. Key Lock (Command:m)
• To lock the front panel controls on the TV.
Transmission
[[k][m][ ][Set ID][ ][Data][Cr] ]
Data 0: Lock off 1: Lock on
Acknowledgement
[[m][ ][Set ID][ ][OK][Data][x] ]
• If you're not using the front panel controls on the TV, use this
mode. When main power is on/off, remote control lock is
released.
15. Balance (Command:t)
• To adjust balance.
Transmission
[[k][t][ ][Set Ig][ ][gata][Cr] ]
Data Min: 0 ~ Max: 64 (transmit by Hexadecimal code)
• Refer to 'Real data mapping 1'. See page 54.
Acknowledqement
[[t][ ][Set ID][ ][OK][Data][x] ]
16. Key (Command:m c)
• To send IR remote key code,
Transmission
[[m][c][ ][Set ID][ ][Data][Cr]
Data: Key code (Refer to P,57)
Acknowledqement
I[c][ ][Set ID][ ][OK][Data][x]
L
55