LG 26LX2R Owner's Manual page 29

Ope[atio_
i
Menu Opt ions
Auto Program should be used to memorize all the active channels in your area before you are able to use the TV.
- There are two ways of storing channels in the TV's memor_ ;_ou can use either.
- One is calledAUTO PROGRAM and the other is called MANUALPROGRAM.
In AUTO PROGRAM mode, the 7q/ will memorize the channels in ascending numerical order, ff there are additional
channels you want to add or delete, you can manually add or delete those channels with Manual Program.
o Redo Auto progrc_rn ff the TVis
ever moved to another location.
- Auto
_am
willsearc_ forchan-
n#.s on/y_ _e Antenna jack.
o If channels numbers for broad-
cast overdhe air TV and cable
TV are duplicated where different
channels have the same numbe6
press the same number buttons
again to toggle between:
Broadcast TV Cabie TV
Channels _ Chan_els
(For example, press 17 to go to the
channel press 17 again to _ to the
dupFicated channeL)
2
3
4
Press the MENU button and then use A t T button to set_t _e CHANNEL
menu.
Press the I,,, button and then use A lT button to select Auto progr_,
Press the I_ button AUTO PROGRAM starts the channel search,
If you want to stop auto programming, press the ENTER button. Only
the channels found up to at that time are memorized.
- You can add or delete channels
from the channel scan manuafly,
Press the MENU button and then use A /T button to se[e_ the C_ menu.
2 Press the I_ button and then use A t T button to select Manualpt_rcm_.
3 Press the I_ button and then use < zI_ button to select a channel you
want to add or erase.
4 Press the T button and then use < / I_ button to select On (memory)
or _ (erase).
5 Press the EXIT button to return to normal TV viewing, The current
channel is added to Memory or Erased from the channel list.
29