Table of Contents
Advertisement
CARE ANDCLEANING
REMOVING AND REPLACING COMPONENTS (CONT.)
Cris
f_
4
)er humidity control
.°
J
You can control the amount of humidity in the
moisture-sealed
crispers. Store vegetables or
fruits requiring more or less humidity in separate
crispers. Adjust the control to any setting
between HIGH and LOW.
• LOW lets moist air out of the crisper for best
storage of fruits.
• HIGH keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
CAUTION • The glass shelf over the crisper is not
firmly secured. Be careful when tilting.
Removing crisper
• To remove, pull the drawer out to full extension.
• Lift the front of the crisper up, then pull it straight
out.
• To install, slightly tilt up the front and insert the
drawer into the frame and push it back into
place.
To remove the glass
• Lif up the glass under the crisper cover.
• Pull the glass up and out.
Glide'N'Serve
__
__
The Glide'N'Serve
provides storage space with a
variable temperature control that keeps the
compartment colder than refrigerator.
This drawer can be used for large party trays, deli
items, or beverages. (but this drawer can't be
used for vegetable.)
Controls
The control regulates the air temperature in the
drawer. Set control level to COLD (print on
surface) to provide normal refrigerator
temperature.
Use the COLDER (print on surface)
setting for meats or other deli items.
NOTE: Cold air directed to the Glide'N'Serve
can
decrease refrigerator temperature. Refrigerator
control may need to be adjusted.
31
Advertisement
Table of Contents
