Removing/Assembling The Freezer Drawer Handle; Removing/Assembling The Doors And Drawers - LG LFX33975ST Owner's Manual

INSTALLATION 13
Removing/Assembling fhe
Freezer Drawer Handle
Removing "the Handles
1
Loosen the set screws D located on the
lower side of the handle with a 1/sin. Atlen
wrench and remove the handle.
Loosen the mounting fasteners _ that
connect to the
freezer drawer
and handle
using a/L in.
Allen wrench,
and remove
the mounting
fasteners.
Assembling "the Handles
1
Assemble the mounting fasteners D at
both ends of the handle using a//4 in. Atlen
wrench.
2
Place the handle on the door by fitting
the handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a//g in.
Allen wrench.
FZ_ WARNING
When assembling or disassembling the
handles:
• Grasp the handle tightly with your hand to
avoid dropping it.
Do not swing the handle towards people or
animals.
Make sure that the bracket hole of the
handle fits properly into the stopper bolt of
the door, Assemble the set screws to fix
the handle into place.
• Make sure that there is not a gap between
the door and handle after assembling the
handle.
\,
Removing/Assembling fhe
Doors and Drawers
Removing the doors is always recommended
when it is necessary to move the refrigerator
through a narrow opening.
F-Z_ WARNING
• If your entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
• Use two or more people to remove and
install the refrigerator doors, Failure to do
so can result in back or other injury.
• Disconnect the electrical supply to the
refrigerator before installing. Failure to do
so could result in serious injury or death.
• Do net put hands, feet or other objects into
the air vents or bottom of the refrigerator.
You may be injured or receive an electrical
shock.
• Be careful when handling the hinge and
stopper. It may result in injury.
• Remove food and bins from the doors and
drawers before detaching.
\,J