Turn The Camera On And Select Mode - Nikon COOLPIX L120 User Manual

o_
c
o_
2O
In I_ (easy auto) mode, the camera automatically determines an appropriate
shooting mode when you frame a picture, allowing you to easily take pictures
using a shooting mode that suits tile scene (_ 34).
1 Remove the lens cap and press the power
switch to turn on the camera.
The lens extends and the monitor turns on.
Press the _ (flash pop-up) button to raise the flash
(_ 7).
Easy auto mode is set at the time of purchase. Proceed
to step 4.
2 Pressthe I_1 button,
3 Press the multi selector • or • to choose 1
I_ Easy auto mode and press the I_) button,
1
The camera enters I_ (easy auto) mode.
4 Check the battery level and number of Battery level indicator
exposures remaining.
Battery level indicator
Display _-_Description
_1 Battery level high.
_] Battery level low.
Prepare to replace batteries.
O
Cannot take pictures.
Battery Replace the batteries.
exhausted.
Number of exposures
remaining
Number of Exposures Remaining
The number of pictures that can be taken is displayed.
The number of images that can be saved varies depending on the capacity of the
internal memory or memory card and image mode setting (_ 53).