MTD 11A-08M5229 Operator's Manual
  1. Manuals
  2. Brands
  3. MTD Manuals
  4. Lawn Mower
  5. 11A-08M5229
  6. Operator's manual
MTD 11A-08M5229 Operator's Manual

MTD 11A-08M5229 Operator's Manual

Push mower
Hide thumbs
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Safe Operation
Practices • Set-Up • Operation
• Maintenance
• Service • Troubleshooting
• Warranty
OPER roR's
L
Push Mower m Model 08M
MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019
PrintedIn USA
FormNo.769-03470
(September 1 0,2007)

Advertisement

Table of Contents
loading

Related Manuals for MTD 11A-08M5229

Summary of Contents for MTD 11A-08M5229

  • Page 1 Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty OPER roR's Push Mower m Model 08M MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019 PrintedIn USA FormNo.769-03470 (September 1 0,2007)

  • Page 2: Customer Support

    Choose from options below: Visit us on the web at www.mtdproducts.com Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683 Write us at MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...

  • Page 3: Important Safe Operation Practices

    importantSafeOperation Practices WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
  • Page 4 12. Amissing ordamaged discharge cover can cause blade When starting engine, pull cord slowly until resistance contact orthrown o bject injuries. is felt, then pull rapidly. Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than 13.
  • Page 5 Service Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., bent, cracked, worn) Replace blade with SafeHandling Of Gas01ine: the original equipment manufacture's (O.E.M.) blade only, To avoid personal injury or property damage use extreme listed in this manual.

  • Page 6: Spark Arrestor

    SparkArrestor AverageUsefulLife According to the Consumer Products Safety Commission (CPSC) and the U.S. Environmental Protection Agency (EPA), internal combustion engine and should not be used ARNING: This machine is equipped with an this product has an Average Useful Life of seven (7) years, or 140 on or near any unimproved forest-covered, brush...
  • Page 7 Sight and hold this level with a vertical tree... or a corner of a building... ¢N 15 ° Usethis page as a guide to determine slopeswhere you may not operate safely. WARNING: Do not operate your lawn mower on such slopes. Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet).

  • Page 8: Contents Of Carton

    AssembJy & Set-Up Contents of Carton One Lawn Mower One Bottle of Oil One Lawn Mower Operator's Manual HandJe Assembly Perform the following sequence for the handle setup: NOTE:This lawn mower is shipped without gasoline or oil in the engine. Fill up the gasoline and oil as instructed in the NOTE: Your mower is shipped with the handle in the higher accompanying engine manual BEFORE operating your mower.
  • Page 9 If satisfied with the height of the handle, tighten the star Position the recoil starter by following the steps below: knobs at the ends of the lower handle shown in Fig. 3-3. Hold the blade control against the upper handle. For convenience of operation, you may adjust the handle Slowly pull the starter rope out of the engine.
  • Page 10 MulchingBaffle(If Equipped) Adjustments If your mower is equipped with an optional mulching CuttingHeight baffle, install it on the right side of the deck. Follow the sequence indicated here. Each wheel has a height adjustment lever to change the cutting height of the mower.

  • Page 11: Controls And Features

    Controls a nd Features Control Recoil Starter Mukhing Baffle ..... Figure 4=1 Recoil S tarter 8lade Control The recoil starter is attached to the right upper handle. Stand The blade control is attached to the upper handle of the mower. behind the unit and pull the recoil starter rope to start the unit.

  • Page 12: Operation

    Operation Starting Engine WARNING: Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower. Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

  • Page 13: Maintenance And Adjustments

    Maintenance& Adjustments Maintenance Follow the Engine Maintenance section for lubrication schedule and instruction for engine lubrication. General Recommendations DeckCare Always observe safety rules when performing Clean underside of the mower deck after each use to prevent maintenance. build-up of grass clippings or other debris.

  • Page 14: Blade Care

    Service Blade Care excessive vibration when rotating at high speeds. It ARNING: An unbalanced blade will cause WARNING: When removing the cutting blade for may cause damage to mower and could break sharpening or replacement, protect your hands with causing personal injury.

  • Page 15: Troubleshooting

    Troubleshooting Problem Cause Remedy Engine Fails to start Blade control disengaged. Engage blade control. Spark plug boot disconnected. Connect w_re to spark boot. Fill tank with clean, fresh gasoline. Fuel tank empty or stale fuel. Engine not primed (if equipped with primer).

  • Page 16: Engine Operation

    EngineOperation Fuel Cap Air Cleaner Grip Oil Drain Spark Plug Mumer Figure 10-1 Pre-0perationCheck 0il Recommendations NOTE:This engine is shipped without gasoline or oil in the engine. Running the engine with insufficient oil can cause serious engine damage and void the engine warranty.
  • Page 17 Check Oil Level Check Fuel Level NOTE: Be sure to check the engine on a level surface with the Clean around fuel fill before removing cap to fuel. engine stopped. Fill tank to approximately 1-inch below lowest portion Remove the oil filler cap and wipe the dipstick clean.

  • Page 18: Engine Maintenance

    EngineMaintenance Periodic inspection and adjustment of the engine is essential if high level performance is to be maintained. Regular any maintenance. To prevent accidental start-up, ARNING: Shut off the engine before performing disconnect the spark plug boot. maintenance will also ensure a long service life. The required service intervals and the kind of maintenance to be performed are described...

  • Page 19: Air Cleaner Service

    AirCleanerService Oil Service Check oil level regularly. Paper filters cannot be cleaned and must be replaced once a year or every 100 operating hours; more often if used in extremely Be sure correct oil level is maintained. Check every five dusty conditions.

  • Page 20: Spark Plug Service

    Measure the plug gap with a feeler gauge. Correct as SparkPlugService necessary by bending side electrode. See Fig. 10-4. The gap should be set to 0.030 in. plug removed. DO NOT crank engine with spark WARNING: DO NOT check for spark with spark plug removed.

  • Page 21: Fuel Filter Service

    Fuel Filter Service Storage The fuel filter cannot be cleaned and must be replaced once a Engines stored between 30 and 90 days need to be treated with year or every 100 operating hours; more often if run with old a gasoline stabilizer and engines...
  • Page 22 If the engine on your mower fails to conform to this limited fuels, lubricants, or additives warranty, MTD will cover the cost of parts and labor associated with Special conditions or circumstances that normally require more any adjustments and/or repairs necessary to return your engine than two pulls to start, specifically: 1) First start-up following your to its warranted condition.
  • Page 24 Moclel 0 8M...
  • Page 25 Model08M Part Number Description Description Part Number Ref. I Ref. 736-0270 710-1205 Bell Washer, .265 ID x .75 OD Eye Bolt 710-0216 720-0279 Screw, 3/8-16 x .75 Wing Nut 747-1161A Blade Control Handle 738-1173 Shoulder Screw 749-1092A 734-1987 Rear Wheel, 8 x 1.8, Bar Upper Handle 682-3064 746-04300...
  • Page 26 EngineModel - 1P61 26--...
  • Page 27 EngineModel - 1P61 R°, I Part Number Description 951-10337 Fuel Tank 951-10336 Flywheel Shroud 951-10335 Rubber Fuel Tank Mounting Washer 951-10334 Oil Filler Tube Assembly 951-10333 Dipstick Assembly 951-10330 Cylinder Head Complete 951-10327 Short Block Assembly 951-10320 Stop Switch and Brake Assembly 951-10319 Recoil Spring and Pulley Assembly 951-10314...
  • Page 28 EngineModel - 1P65...
  • Page 29 Engine Model - 1P65 I Part Number Description 951-10337 Fuel Tank 951-10336 Flywheel Shroud 951-10335 Rubber Fuel Tank Mounting Washer 951-10334 Oil Filler Tube Assembly 951-10333 Dipstick Assembly 951-10406 Cylinder Head Complete 951-10407 Short Block Assembly 951-10320 Stop Switch and Brake Assembly 951-10319 Recoil Spring and Pulley Assembly 951-10314...
  • Page 30 MTD. OWNER'S WARRANTY RESPONSIBILITIES: As the smalloff-roadengineowner,youare responsible for the performance of the requiredmaintenancelistedin yourOwner'sManual.MTD recommends that you retainall your receiptscoveringmaintenances on yoursmall off-roadengine,but MTDcan notdenywarrantysolely for the lack of receiptsor for yourfailureto ensurethe performanceto all scheduledmaintenance. As the smalloff-roadengineowner,youshouldhoweverbe awarethat MTDmaydenyyour warrantycoverageif yoursmall off-roadengineor part hasfaileddue to abuse,neglect,impropermaintenance or unapprovedmodifications.
  • Page 31 (9) Any replacement p art maybe usedin the performance of any warrantymaintenance or repairsand mustbe providedwithoutchargetothe owner.Such usewill not reducethe warrantyobligationsof MTD. (10) Add-onor modifiedparts that are not exemptedby theAir ResourcesBoardmay not be used.The useof anynon-exempted add-onor modifiedpartsshall be groundsfor disallowinga warrantyclaimmade in accordancewith this article.The enginemanufacturer shall notbe...

  • Page 32: Limited Warranty

    MANUFACTURER'S LiMiTED WARRANTY The limited warranty set forth below is given by MTD LLC with c. Service completed by someone other than an authorized service dealer. respect to new merchandise purchased and used in the United States and/or its territories and possessions, and by MTD Products Limited d.
  • Page 33 Medidas importantes de seguridad • Configuraci6n • Funcionamiento • Mantenimiento • Servicio • Soluci6n de problemas • Garantia Podadora de Ernpuje m Modelo 08M MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019 Formular[oNo.769-03470 Impresoen Estados UnidosdeAmerica (Septiembre 10,2007)
  • Page 34 Visite nuestro sitio web en www.mtdproducts.com Llame a un representante de Asistencia al CIiente al (800) 800-7310 6 (330) 220-4683 Escribanos a MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...

  • Page 35: Medidas Importantes De Seguridad

    Medidas importantesdeseguridad ADVERTENCIA" La presencia de este simbolo indica que se trata de instrucciones importantes de seguridad que se deben respetar para evitar poner en peligro su seguridad personal y/o material y la de otras personas. Lea y siga todas las instrucciones de este manual antes de poner en funcionamiento...
  • Page 36 8. Noponga l as manos olospies c erca d elas piezas rotatorias control delacuchilla yotros d ispositivos deseguridad oenlatolva delacortadora. El c ontacto conlas cuchillas yprotecci6n ensulugary f uncionando. Nunca opere l a puede p roducir laamputaci6n demanos ypies. cortadora silos dispositivos deseguridad est_n d ahados.
  • Page 37 Mantenga a los ni_os fuera del _rea de trabajo y bajo Limpie la gasolina derramada sobre el motor y el equipo. estricta vigilancia de un adulto responsable adem&s del Traslade la m_quina a otra zona. Espere 5 minutos antes de encender el motor.
  • Page 38 manual. "La utilizaci6n de partes que no cumplan con las Guardachispas especificaciones de equipos originales podria tenet como resultado un rendimiento incorrecto y adem_s la seguridad ADVERTENCIA:ESTA m_quina est_ equipada podHa estar comprometida" un motor de combusti6n interna y no debe ser utilizada en o cerca de un terreno agreste cubierto...
  • Page 39 un Arbolvertical... Alineey sostengaeste nivel con DOblo a Io o la esquina de una construcci6n... o el poste de una cerca. ntoada Una._Pendiente I __ de15 ¢N £ Useesta p&ginacomeguia paradeterminar las inclinaciones de iaspendientesen lasque podriano tenor unaoperad6n segura. WARNING: No pode en inclinaciones mayores a 15 grados...

  • Page 40: Contenido De Ia Caja

    Montajey Configuraci6n Contenido de ia caja Una Podadora Uno Botella del Aceite Uno Manual de Operador ManUa Montaje Realice la secuencia a continuaci6n para ajustar la manUa: NOTA: Esta unidad se envia sin gasolina ni aceite en el motor. Llene con gasolina y aceite como se indica en las instrucciones NOTE: Su podadora se envia con la manUa en la posici6n...
  • Page 41 Si e st_ satisfecho con laaltura d elamanija, apriete l as 3. Colocaci6n delaguia decuerda como sigue e nlaFig. 3-4: tuercas demari posa e nlos extremos delamanija inferior mostrados enlaFig. 3-3. Para c omodidad delaoperacidn, puede a justar laaltura d elamanija c omo s igue: Figura 3=4 Sostenga la manija...
  • Page 42 ToIvade Abono(DeSetequipado) Ajustes Si su podadora est,1 equipada con un deflector opcional Una placa de ajuste y una palanca en cada rueda proporcionan para abono, inst_ilelo al lado derecho de la plataforma. Siga ajuste de la altura de corte. la secuencia que se indica.
  • Page 43 Controles Y Caracter sticas Perilla de Est,_rter Arrancador de retroceso Palanca de ajuste de altura de corte (en carla rueda) Tolva de abono ..... Figura 4=1 Controlde CuchUla Arrancador d e getroceso El control de la cuchilla est.1 unido a la manija superior. Presione El arrancador de retroceso...
  • Page 44 Funcionamiento Encendido dei Motor ADVERTENCIA: Asegurese que ninguna persona aparte del operador permanezca cerca de la podadora mientras arranca el motor u opera la misma. Nunca encienda un motor en espacios cerrados o en una zona con poca ventilaci6n. escape del motor contiene mon6xido de carbono, un gas inodoro...

  • Page 45: Mantenimiento Y Ajustes

    MantenimientoYAjustes Mantenimiento Lubrique el resorte de torsi6n y los puntos cruciales del deflector del canal con aceite ligero una vez pot RecomendadonesGenerales temporada para prevenir la oxidaci6n. Ver la Fig. 6-1. Siga la secci6n de Mantenimiento de Motor para lista de Respete siempre las reglas de seguridad cuando...
  • Page 46 Servido Cuidadode ia Cuchiila Lubrique el cigOe_al del motor y la superficie interna del adaptador de la cuchilla con aceite ligero. Deslice el ADVERTENCIA: Cuando saque la cuchilla de corte adaptador de la cuchilla sobre el cigOe_al del motor. Instale la cuchilla con el lado marcado "Bottom"...
  • Page 47 Solud6n de problemas Problerna Rernedio Causa El motor no arranca 1. El control de I_mina se retir6. 1. Contratar el control de I_mina. 2. Alambre de bujia desconectado. 2. Unirelalambrea la bujia. 3. Dep6sito de combustible combustible vac[o 3. Llenar el tanque de [a gasolina hmpia, fresca. o ahejo.
  • Page 48 Problema Causa Remedio Demasiada vibracibn 1. Cuchilla floja o desequilibrada. 1. Apriete la cuchilla y el adaptador. Equilibre la cuchilla. 2. Cuchilla abollada. 2. Consulte a un distribuidorautorizado. Corte desigual 1. La posici6n de las ruedas no es correcta. 1. Coloque las cuatro ruedas en la misma posici6n de altura (de ser equipado ajustadores de altura individuales).

  • Page 49: Funcionamiento Demotor

    Funcionamiento deMotor Tap6n de combustible Depurador de aire Tubo de drenaje ......Bujia de encendido Figura 10-1 (ontrol Previo al Fundonamiento Recomendadones S obreel Aceite IMPORTANTE: Este motor se despacha sin gasolina ni aceite en el motor. Hacer funcionar el motor sin suficiente aceite puede causarle graves daEos y anula la garantia...
  • Page 50 Verifiqueel Nivel de Combustible Antes de sacar la tapa para cargar combustible, limpie alrededor. Llene el tanque hasta aproximadamente 1 pulgada debajo de la parte m_s baja del cuello para permitir la expansi6n del combustible. Tenga cuidado de no Ilenar en exceso. Tap6n de llenado IMPORTANTE:Antes de cargar, deje que el motor se enfrfe...

  • Page 51: Mantenimiento Demotor

    Mantenimiento deMotor La inspecci6n y los ajustes peri6dicos del motor son esenciales si se desea mantener un alto nivel de desemper_o. el mantenimiento. Para evitar una puesta en marcha i_l= ADVERTENCIA: Apague el motor antes de realizar mantenimiento regular tambi_n garantizar_ una prolongada accidental,...
  • Page 52 Mantenimientodel aceite NOTA: Elimine el aceite del motor usado de la manera que sea compatible con el medio ambiente. Sugerimos que Io Inspeccione el nivel de aceite regularmente. coloque en un recipiente sellado y Io Ileve a la estaci6n de servicio local para su recuperaci6n.
  • Page 53 Mida la separaci6n de bujia con un calibrador. Corrija de Mantenimientode Bujia set necesario torciendo el electrodo lateral. Vea la fig. 10-4. La separaci6n debe establecerse en 0,030 pulg. bujia de encendido. NO de arranque al motor si no ADVERTENCIA: NO pruebe la chispasi no est_ la est_ la bujia de encendido.
  • Page 54 Servicio conFUtrode Combustible Aimacenamiento El filtro de combustible no puede set limpiado y debe set Los motores almacenados entre 30 y 90 dias tienen que sustituido una vez al aho o cada 100 horas de operaciones; m_s a set tratados con un estabilizador de gasolina y los motores almacenaron...
  • Page 55 Adem_,sde los otros t_rminos y las condiciones de la garantia consulte su Manual del Operador) -- falta de drenaje del sistema limitada que rigen para su nueva cortadora, MTD LLC ("MTD") por de combustible anterior a cualquier periodo sin uso superior a tres la presente garantiza que el motor de la cortadora arrancar_,cuando meses.
  • Page 57 NOTAS...
  • Page 58 Subsecci6n(c) debe estar garantizadapor un periodode garanfiadefinidoen la Subsecci6n(a) (2). Si la piezafalladurante ei periodode coberturade la garanfia,la mismaser_ reparadao reemplazada por MTD de acuerdocon la Subsecci6n(4) a continuaci6n. Cualquierpiezareparadao reemplazada seg_nla garanfiase garantizar_ por el restodel periodode garanfia.
  • Page 59 (9) Cualquierpiezade reernplazose podr_, u sar parael curnplirniento del rnantenirniento o reparaciones bajogaranfia,y se surninistrar_, sin cargoal propietario.Dichousono reducir_, l as obligaciones de garantiade MTD. (10) No se podr_.n usarpiezasadicionalesni rnodificadas que no est_nexentasde acuerdocon el Departarnento de los Recursos del Aire (Air ResourcesBoard).El usode piezasadicionaleso rnodificadasno exentasser_.
  • Page 60 El da_o resultante per la instalaci6n o el personas o personasjur[dicas, incluidos los distribuidores use de piezas, accesorios o uniones no aprobados per MTD para su los minoristas con respecto a los productos, obligar_ a MTD.

This manual is also suitable for:

08m

Table of Contents