Dell Inspiron 560s Service Manual page 27

CAUTION: Take care not to damage the cable connectors and the cable routing clips when sliding the front I/O panel into the front I/O panel
clamp slot.
1. Follow the procedures in Before You
2. Route and connect the cables that you disconnected from the system board connectors.
3. Align and slide the front I/O panel into the front I/O panel clamp slot.
4. Replace the screw that secures the front I/O panel to the chassis.
5. Replace the hard drive (see
6. Replace the support bracket (see
7. Replace the front bezel (see
8. Replace the computer cover (see
9. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Replacing the Hard Drive).
Replacing the Support Bracket).
Replacing the Front Bezel).
Replacing the Computer Cover).