Contents Of Hardware Pack - MTD 500 Series Operator's Manual

SECTION 3: CONTENTS OFHARDWARE P ACK
The lawn mower is shipped with following loose parts in the carton. Please remove all loose parts, includingthe
hardware pack, from the carton before discarding if. Compare the contents of the hardware pack with the hardware
shown on this page. See Figure 1. The hardware pack may contain extra items which are not used on your unit.
ATTACHING FRONT WHEELS
xle Bolts
Cupped Washers
ATTACHING REAR WHEELS
(IF NOT ASSEMBLED)
Flat
Washers
©©
Hex Jam Nuts
Spacers
Wave Washers
ATTACHING STRUTS (IF EQUIPPED)
Lock Washers
Hex Nuts
®@
Hex Nuts
Hex Bolts
Q
Carriage Bolts Saddle Washer
Bell Washe_
Figure 1
NOTE: Hardware pieces illustratedhere are not drawn to actual size.