Miele Novotronic G 842 PLUS Operating Instructions Manual page 36

Frequentny asked questions
What if ...
the "End", "Start" and
"Top Soto" indicators
flash at the same time at
the end of a program?
there is a knocking
noise in the wash cabi-
net?
there is a rattling noise?
there is a knocking
noise in the water
j_pes?
dishes are not dry,
glasses and cutlery are
spotted?
Possible fault
There may be a technical
faulL
The spray arm is hitting
an item in the baskeL
Items are not secure in
the wash cabineL
This may be caused by
the installation or the di-
ameter of j_ge,
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty,
Dishes were taken out too
soon,
Fix
- Turn the program selec-
tor to 'Stop",
- Turn off the dishwasher,
A few seconds later:
- Turn the dishwasher on,
- Select the desired pro-
gram,
- Press the "Start" button,
If the indicators flash
again, there is a technical
_roblem,
- Call the Miele Technical
Service DepartmenL
Interrupt the program, re-
arrange items blocking
Interrupt the program and
This has no effect on the
dishwasher, If in doubt
contact a _olumber,
Increase the dosage or
refill the reservoir, see "Be-
fore using for the first
time",
Leave dishes in longer.
36