Miele NOVOTRONIC G 842 PLUS Operating Instructions Manual
Miele dishwasher user manual
Hide thumbs
Also See for NOVOTRONIC G 842 PLUS:
- Operating instructions manual (52 pages) ,
- Operating instructions manual (48 pages)
Related Manuals for Miele NOVOTRONIC G 842 PLUS
Summary of Contents for Miele NOVOTRONIC G 842 PLUS
-
Page 1: Operating Instructions
Operating instructions Novotronic G 842 Plus G 842 SC Plus To prevent accidents and machine damage, read these instructions installation or use. M.-Nr. 06 088 620... -
Page 2: Table Of Contents
Running the dishwasher ........ - Page 3 Changing a program ..........32 Program guide .
- Page 4 Installation and repair work should be by a Miele authorized service technician. Work by unqualified per- sons could be dangerous and could void the warranty. , WARNING - Fire hazard Do not cover or crush the plug of an electric appliance.
- Page 5 However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Tech- nical Service Department with specific requirements. Inspect the dishwasher for ship- ping damage.
-
Page 6: Wash Cabinet
When discard- ing an old dishwasher, unplug it from the power outlet, remove the door to the wash cabinet and cut off the power... - Page 7 Le fabricant ne peut être tenu responsable de dommages ou blessures causés par l’usage inapproprié de l’appareil. Tout usage inapproprié est déconseillé. Cet appareil est destiné à un usage domestique uniquement. Conservez ces consignes dans un lieu sûr et transmettez-les à tout utilisateur futur.
- Page 8 Toutefois, son ins- tallation est possible dans certaines cir- constances. Veuillez communiquer vos exigences particulières au détaillant Miele le plus près de chez vous ou au service du soutien technique. Vérifiez si votre lave-vaisselle n’a pas subi de dommage lors du transport.
- Page 9 N’utilisez le lave-vaisselle que lorsque tous les panneaux sont bien en place. Ne jouez pas avec les commandes. Afin de diminuer le risque de bles- sures, ne laissez pas les enfants jouer près de l’appareil ni monter de- dans ou dessus. Évitez de malmener la porte ou les paniers du lave-vaisselle ou de vous y appuyer ou asseoir.
- Page 10 ^ For fastest possible wash times, yet higher energy consumption, connect the dishwasher to a hot water source. ^ Make full use of the baskets without overloading for the most economical washing.
- Page 11 Upper spray arm (not visible) Cutlery tray Upper basket Water feed for middle spray arm Middle spray arm Lower spray arm Four height adjustable feet Triple Filter System Salt reservoir Detergent dispenser Rinse aid reservoir Data plate...
- Page 12 "On/Off" button Program sequence display "Start" button Program selector Every dishwasher is tested before leaving the factory. Any water remaining in the machine is from these tests and does not indicate that the machine has been used. Check/Refill indicators Child Safety Lock...
- Page 13 ^ Press the release catch inside the door grip. If the door is opened during operation, the dishwasher will stop running. Once the door is closed the program will re- start. ^ Push the baskets in. ^ Lift the door and push until it clicks into position.
- Page 14 If your water hardness is consistently lower than 8 gr/gal (140 ppm), you do not need to add dishwasher salt. How- ever, the dishwasher must still be pro- grammed to correspond to the local water hardness.
-
Page 15: Control Panel
Your water hardness level must be pro- grammed into the dishwasher using the program selector and buttons on the control panel. ^ Make sure the dishwasher is turned off. ^ Turn the program selector to "Stop". ^ Press and hold the "Start" button and at the same time turn on the dish- washer with the "On/Off"... -
Page 16: Water Softener
^ Press the "Start" button. The "Start" indicator will light. ^ Turn the program selector to "Stop". ^ Turn off the dishwasher with the "On/Off" button. The programmed water hardness is stored. ^ Make sure the dishwasher is turned off. - Page 17 Other salts may contain insoluble additives which can impair the water softener. The proper salt can be purchased from your Miele dealer or Miele’s Technical Service Department. ^ Remove the lower basket. ^ Unscrew and remove the salt reser- voir cap located on the floor of the wash cabinet.
- Page 18 After the reservoir has been filled, the water softener is automatically reacti- vated the next time the dishwasher is started. The "Salt" indicator will be lit during this process. If your water is soft (below 8 gr/gal) the salt reservoir should not be filled with salt.
- Page 19 Rinse aid is recommended to prevent spotting on dishes and glassware. Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir. ^ Add rinse aid before the first use and whenever the "Rise aid"...
-
Page 20: Rinse Aid Indicator
The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 1 to 6. ^ Use a higher setting if spots appear on dry glassware. ^ Use a lower setting if streaking ap- pears on dishes or glasses. - Page 21 ^ Food residue and spilt liquids should be cleaned from the sides of the dishwasher door. These are outside of the wash cabinet and are not cleaned by water from the spray arms.
- Page 22 – Clouding or etching may occur on glasses after frequent washing. – When purchasing new dishes, glasses and cutlery, make sure they are dishwasher safe. – Silver or aluminum items may tarnish. – Silverware previously cleaned with a silver polish may be damp or spotted at the end of a program where water has adhered to the polish.
- Page 23 ^ For the best cleaning results, spoons and forks should be placed in the basket with handles down. Knives and other pointed objects can be loaded with their handles up to pre- vent injuries. ^ Place small spoons into the slots on either side of the cultery basket.
- Page 24 The removable cutlery tray makes un- loading flatware easy. Simply carry the cutlery tray to where the flatware is stored and put the entire basket away in one trip. For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc.
- Page 25 On select models, the upper basket can be raised or lowered to accommo- date tall items. ^ Slide out the upper basket. ^ Pull up the levers at the sides of the upper basket and adjust the basket height. ^ Release the levers and the basket will lock in place.
- Page 26 Raise the rack to make room for tall glasses. Lower it to double stack smaller pieces. To allow water to run off the bottom of coffee mugs, place slanted on top of the coffee bar. The bar can also be used to separate two rows of glasses.
- Page 27 For larger and heavier items such as plates, serving platters, sauce pans, bowls.
- Page 28 The guide at the front of the upper bas- ket determines the maximum height for items placed in the lower basket so that the middle spray arm is not blocked. Two rows of spikes can be folded down, to create more room for larger dishware e.g.
-
Page 29: Cutlery Basket
Additional inserts for the upper and lower baskets may be purchased from your Miele dealer or the Miele Technical Service Department. Vase / Bottle holder Mini Cutlery Basket Upper Basket Glassware Insert to wash milk or baby bottles attaches to the lower basket... - Page 30 The horizontal marks in Compartment II indicate levels of approximately 1 and 2 tablespoons (20, 25 and 30 ml) respectively. ^ With the dishwasher door fully open fill compartment II with 2 tablespoon (30 ml) of powder detergent, or one detergent tablet.
- Page 31 Important program steps could be omitted (e. g. reactivating the water softener). All Miele dishwashers are specially de- signed to shut off the water intake and drain the wash cabinet in the rare event of an internal water valve failure.
- Page 32 ^ Turn the program selector (16) to "Stop". ^ Turn off the dishwasher. ^ Open the dishwasher door slightly to allow the dishes to cool before un- loading. It is advisable to turn off the water supply if the dishwasher will not be used for a period of time (e.g.
- Page 33 Program Pots & Pans for heavily soiled pots and pans with dried on food Main wash temperature Run-time Sani Wash extended wash time Main wash temperature Run-time Economy energy saving program for normally soiled dishware Main wash temperature Run-time Normal Plus higher wash temperature helps to clean Main wash temperature Run-time...
- Page 34 – Turn the program selec- tor to the desired pro- gram. – Press the "Start" button. Reset the circuit breaker. Make sure it is a 15 A breaker. See maintenance instruc- tions. Contact a plumber. Call the Miele Technical Service Department.
- Page 35 Water intake error Drain error, water left in the wash cabinet – Turn off the dishwasher before fixing the prob- lem. – Open the water valve. – Clean the water intake filter, see maintenance instructions. – Turn off the dishwasher before fixing the prob- lem.
- Page 36 – Select the desired pro- gram. – Press the "Start" button. If the indicators flash again, there is a technical problem. – Call the Miele Technical Service Department. Interrupt the program, re- arrange items blocking the spray arms. Interrupt the program and rearrange loose pieces.
-
Page 37: Adding Detergent
The dishes were not loaded correctly. The program was not powerful enough. Not enough detergent was dispensed. The spray arm jets are clogged. The triple filter is clogged or not correctly seated. The drain pump or the non-return valve are blocked. - Page 38 The drain pump or the non-return valve may be blocked. The drain hose is kinked. There is no remedy. Only wash dishwasher safe glasses. Use more detergent, see "Adding detergent". Discoloration is perma- nent. Reseat and screw the cap on firmly.
- Page 39 Miele Technical Service Department. U 1-800-999-1360 techserv@mieleusa.com V 1-800-565-6435 service@miele.ca When contacting the Miele Technical Service Department, please quote the model and serial number of your appli- ance. These can be found on the data plate on the upper inside edge of the dish- washer door.
- Page 40 To transport the dishwasher, e. g. when moving to a new home, note the follow- ing: – Empty the dishwasher. – Secure any loose parts, e. g. hoses, cables, cutlery baskets. – Transport the dishwasher in the up- right position.
-
Page 41: User Maintenance Instructions
User Maintenance Instructions To prevent accidents and machine damage, read these instructions installation or use. - Page 42 The filter system should be cleaned ev- ery 4 - 6 months or whenever a foreign object is trapped. ^ Turn off the dishwasher before clean- ing. ^ Turn the handle counterclockwise to release the triple filter system.
- Page 43 ^ Close the flap so that the clip en- gages. ^ Return the filter so it lies flat in the base of the wash cabinet. ^ Lock the filter by turning the handle clockwise. The dishwasher must not be used without the filter locked in place.
- Page 44 Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months. ^ Turn off the dishwasher before clean- ing. Remove the spray arms as follows: ^ Remove the cutlery tray (if present).
- Page 45 The wash cabinet can be cleaned with a dishwasher cleaner such as Dis Cleaner available from your Miele dealer or the Miele Technical Service Department. ^ Wipe the door seal with a damp cloth to remove any food particles.
- Page 46 These filters can be purchased from Miele’s Technical Service Depart- ment. The plastic valve housing on the intake hose contains electrical com- ponents and should not be im- mersed, or run through water.
-
Page 47: At The End Of A Program,
If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ Turn off the dishwasher. ^ Remove the triple filter (see "Cleaning the filter in the wash cabinet"). - Page 48 Alterations rights reserved / 4403 M.-Nr. 06 088 620 / V00 This bio-friendly paper was bleached without the use of chlorine.