Table of Contents
Advertisement
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
•
•
•
•
•
Do:
•
•
Detaching the monitor hinge cover and stand
step 1: Place the monitor on a soft and flat surface. Remove the stand first.
step 2: Push up the VESA cover and take down the VESA cover.
step 3: Then loosen the four screws on the hinge and remove the base.
Wall Mounting (Optional)
Refer to the instructions that come with the base mounting kit. To convert your LCD
display from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical
equipment.
Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.
Lightly dampen a soft cloth with water and use this to gently wipe the covers and
the screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.
3
2
1
Chapter 2.
2-9
Advertisement
Table of Contents
