Maytag NEPTUNE MD-6 User Manual page 7

Note: The dial can be turned in either direction to select a cycle. Once started, the dial
will not advance at a specific rate during the InteUiDry cycles. At first the dial may not
advance at all. Toward the end of the cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quickly. This is normal operation.
IntelliDry I_GUL_ au[omatica!!y,_VS the mOisture in
T_-DRY!A!R !%t_F:
may:be
the load: _d siiuts: bff :when _e selected Bess level is: selected for "i _ _:._lpad 'if ! the. :_
reached. This Cycle is designed for loads such as towels, :ih;ielliDry_S:efis°r "¢system_"is 'n_i"
• d "
underwear, t-shirts, jeans, etc. Set the control to the desired • eslred. ' Set the contro! to the
dryness level (more dry - less dry). The triangle symbol, &, •** desired number Of minuteS_ .....
between more dry and less dry is the initial preferred setting .o
for the majority: of loads /•
0
IntelliDry
REGULAR
OFF MORE DRY
PRESS CARE
:E
OFF
COOL DOWN
LESS DRY
MORE DRY
OFF •
l:
LESS DRY
Step 0 End of Cycle Signal
Step 0 Press Start
6