Advertisement
Available languages
Available languages
GROUNDING
iNSTRUCTiONS
• For a grounded, cord-connected
dryer:
This dryer must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
This dryer uses a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged
into an appropriate
outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
• For a permanently connected dryer:
This dryer must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding
terminal or lead on
the dryer.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative
or personnel if you are in doubt as to whether the dryer is
properly grounded. Do not modify the plug on the power
supply cord: if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
SAVE THESE
INSTRUCTIONS
ELECTRICAL REQUIREMENTS
- CANADA
ONLY
Electrical Shock Hazard
Plug into a grounded
4 prong outlet.
Failure to do so can result in death or electrical
shock.
[b supply
the required
4 wire, single phase, 120/240
volt, 60 Hz., AC only electrical
supply on a separate 30-amp
circuit,
fused on both sides of the line. A time-delay
fuse or
circuit
breaker
is recommended.
Connect
to an individual
branch
circuit.
This dryer is equipped with a CSA International Certified Power Cord intended to be
plugged into a standard 14-30R wall receptacle. The cord is 5 ft (1.52 m) in length. Be
sure wall receptacle is within reach of dryer's final location.
4-wire
r_'ceptacl_"
14-30R
•
Do not use an extension
cord.
If you are using a replacement
power supply
cord,
it is recommended
that you use Power
Supply
Cord Replacement
Part Number
3394208.
For further
information,
please reference
the service
numbers
located
in the "Assistance
or Service"
section of this manual.
GROUNDING
INSTRUCTIONS
• For a grounded, cord-connected
dryer:
This dryer must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
This dryer is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative
or personnel if you are in doubt as to whether the dryer is
properly grounded. Do not modify the plug provided with the
dryer: if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
SAVE THESE
INSTRUCTIONS
It is your
responsibility
•
[b contact
a qualified
electrical
installer.
•
lb be sure that the electrical
connection
is adequate
and in conformance
with the
Canadian
Electrical
Code, C22.1 -latest edition
and all local codes.
A copy of the above
codes standard
may be obtained
from: Canadian
Standards Association,
178 Rexdale
Blvd., ]oronto,
ON M9W
1 R3 CANADA.
Advertisement
